Wi-Tek - WI-CPE513P-SINGLE - 5GHz 5KM Wireless Transmitter-Single
Product Overview
WI-CPE513P-KIT V3 is a 5GHz outdoor wireless transmission kit designed for long-range point-to-point and point-to-multipoint network links. It provides wireless rates up to 300Mbps, uses built-in 15dBi directional antennas, and supports a recommended transmission distance of up to 5km. Each unit includes Gigabit-class PoE connectivity, quick pairing controls, flexible operating modes, and IP65-rated outdoor protection.
Key Configuration
Model: WI-CPE513P-KIT V3 | Wireless Standard: IEEE 802.11a/n | Frequency: 5.150-5.850GHz | Wireless Rate: Up to 300Mbps | MIMO: 2×2 MU-MIMO | Antenna: Built-in 15dBi directional antenna | Connectivity: 1×10/100Mbps WAN PoE IN, 1×10/100Mbps LAN PoE OUT per unit | Distance: Up to 5km | Protection: IP65 | Kit: 2 wireless transmitters
Key Features
- · 5GHz wireless transmission with rates up to 300Mbps
- · Built-in 15dBi directional antennas support links up to 5km
- · 2×2 MU-MIMO technology improves wireless transmission efficiency
- · Supports point-to-point and point-to-multipoint networking
- · 10/100Mbps WAN PoE input and LAN PoE output ports on each unit
- · Base station and CPE modes are selected using the DIP switch
- · Pairing-group buttons simplify wireless link setup
- · Supports 802.3at PoE input and 802.3af PoE output
- · Supports bridge, router, repeater, and WISP operating modes
- · IP65 outdoor enclosure with ±4kV contact and ±8kV air-discharge ESD protection
Technical Context
The directional antennas concentrate the wireless signal toward the remote endpoint, enabling long-range outdoor bridging. Base station and CPE modes define the transmitter and receiving roles, while pairing-group controls simplify installation of matching units. Repeater and WISP modes provide additional options for extending or sharing wireless connectivity.
Installation Notes
Each transmitter measures 260 × 88 × 56mm and weighs approximately 0.40kg. The units support wall or pole mounting and use an outdoor UV-stabilized plastic enclosure with IP65 protection. Operating temperature is -40°C to 70°C with 5%-95% non-condensing humidity. Connect the PoE input to the network or PoE adapter and the PoE output to a compatible powered device.
| General | |
| Product | WI-CPE513P-KIT |
| Hardware Version | V3 |
| Product Type | 5 GHz 300 Mbps Long-Range Outdoor Wireless Transmitter Kit |
| Recommended Distance | Up to 5 km |
| Hardware | |
| Memory | 64 MB DDR2 |
| Flash Memory | 16 MB |
| Interfaces | 2 × 10/100 Mbps RJ45 ports 1 × Reset button 1 × DIP switch |
| Power Supply | 48 V IEEE 802.3at PoE input 48 V IEEE 802.3af PoE output |
| Power Consumption | 15 W |
| Wireless | |
| Wireless Standard | IEEE 802.11a/n |
| Maximum Wireless Rate | Up to 300 Mbps |
| MIMO | 2 × 2 |
| Antenna Gain | 14 dBi |
| Half-Power Beamwidth | Horizontal: 60° Vertical: 15° |
| Frequency Range | 5.18–5.825 GHz Frequency selection must comply with national regulations. |
| Channel Width | 20/40 MHz |
| Transmit Power | Up to 26 dBm, country-dependent |
| PoE | |
| PoE Input | 48 V IEEE 802.3at |
| PoE Output | 48 V IEEE 802.3af |
| PoE Passthrough | Supported |
| Operating Modes | |
| Wireless Modes | Basic Station CPE Repeater WISP |
| LAN Configuration | Static IP, Dynamic IP and PPPoE client |
| WAN Configuration | Static IP, Dynamic IP and PPPoE client in WISP mode |
| Wireless Configuration | |
| Wireless Functions | Wireless enable/disable Default SSID modification SSID hiding Adjustable country/region Automatic channel width selection Automatic frequency selection Adjustable transmission power Maximum associated stations Weak signal rejection threshold User isolation WMM support RTS/CTS threshold |
| Wireless Security | WPA-TKIP WPA2-AES WPA1/WPA2-Mixed WPA/WPA2-Enterprise |
| VLAN | IEEE 802.1Q VLAN passthrough |
| Advanced Features | |
| Advanced Functions | Spectrum analysis Scheduled reboot Ping watchdog NTP server Ping Traceroute Speed test |
| Status Monitoring | LAN/WAN information Wireless information System information Radio status Real-time flow chart Wireless terminal stations SSID list DHCP client information ARP table Routing table |
| Management | |
| Management Interfaces | Local web-based management Remote management through Wi-Tek Cloud platforms and applications Device discovery tools |
| Physical | |
| Product Dimensions | 259 × 88 × 51 mm |
| Net Weight | 0.41 kg × 2 |
| Package Dimensions | 342 × 106 × 98 mm |
| Package Weight | 1.6 kg |
| Installation | Outdoor installation |
| Reliability and Environment | |
| ESD Protection | Contact discharge: ±4 kV Air discharge: ±8 kV |
| Surge Immunity | Common mode: ±2 kV Differential mode: ±4 kV |
| Operating Temperature | -40°C to 70°C |
| Operating Humidity | 5% to 95%, non-condensing |
