GJD - GJD261 - D-TECT 3 IP Enabled Dual-Tech M/Wave + Quad PIR 30m (98ft) Volumetric Motion Detector - Silver Housing
D-TECT 3 IP Enabled Dual-Tech M/Wave + Quad PIR 30m (98ft) Volumetric Motion Detector. Silver housing
Part number:
GJD261
Price:
Description

98.4ft Dual Tech IP Motion Detector

The D-TECT 3 IP is an internet protocol connected dual tech detector that combines PIR and microwave sensors along with advanced signal processing and unique optical systems.

The detection beam range can be programmed to 98.ft, avoiding boundary overspill and making it particularly effective for perimeter detection.

Using Power over Ethernet and IP communication, the D-TECT 3 IP supports direct integration with all major VMS and camera systems, while keeping the installation just as easy as setting up an IP camera.

 

DETECTION RANGE Up to 30m (98.5ft) programmable
COVERAGE 10º - 70º detection angle, 30m x 30m (98.5ft x 98.5ft) max
WALK TEST Output test mode with LED indication
OPERATING TEMPERATURE -20ºC to +55ºC (-4ºF to 131ºF). Conformally coated electronics for increased stability
ADJUSTMENT 180º pan + 90º tilt
MOUNTING HEIGHT Optimum 3m (9.8ft)
INDICATOR LEDs 1 x Blue LED on alarm

1 x Red PIR detection

1 x Green microwave detection

OUTPUTS Two N/C volt free relay contacts. Web interface set up required
POWER INPUT Power over Ethernet (48VDC)
POWER CONSUMPTION Max 3.8W, PoE class 1
ETHERNET STANDARD Ethernet IEEE 802.3af, TCP/IP
REMOTE ACCESS Web browser user interface. No software or installation needed
MICROWAVE FREQUENCY 10.525GHz
UL Approval
Name
Description
Size
Downloads
File
D-TECT 3 IP Datasheet
0.8mb
File
D-TECT 3 IP Manual
1.4mb
File
D-TECT 3 IP Network Integration Manual
0.2mb
File
D-TECT IP Integration with Milestone
2.8mb
File
D-TECT IP Integration with Hikvision iSeries K2
0.6mb
File
Milestone D-TECT Driver Setup
0.3mb
File
Milestone GJD Integration Examples & Walkthrough
2.8mb
File
Hanwha -PoE Extender Camera Solution
1.5mb
File
Wave Integration
3.6mb