SECO-LARM - E-931-S33PRGQ - Polarized Reflective Photobeam Sensor, range: up to 33ft
Part number:
E-931-S33PRGQ
Price:

Polarized Reflective Photobeam Sensor, range: up to 33ft (10m),  polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected, 12-30VDC/VAC 60Hz 100mA, Monitored output: N.C./10kΩ Resistor, Form C relay: 500mA@30VAC/VDC, dual-color LED for beam alignment, N.C. tamper circuit, weatherproof for indoor/outdoor use (IP55), Light-On Operation. ETL UL325-2018 Compliant on August 1st.

 

The E-931-S33PRGQ 33ft Polarized Reflective Photoelectric Beam Sensor provides reliable detection of shiny objects that could be missed by a non-polarized sensor

 

Features:

  • Polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected
  • Weatherproof (IP55)
  • Anti-condensation housing
  • 12-30V DC/AC 60Hz, 100mA
  • Up to 33ft (10m) sensing range
  • Round reflector, Diameter: 3-1/4″ (82mm)
  • Form C relay: 500mA@30VAC/VDC
  • Beam status LED
  • Compact size: 4-13/16″x2-3/8″x2-7/16″ (122x60x62mm)
  • N.C. Tamper switch: 500mA@30VAC/VDC
  • Monitored Outputs:
    • N.C.
    • 10kΩ Resistor
  • Hood included for both sensor and reflector
TypePolarized reflective photoelectric beam sensor
Current DrawStandby- 55mA@12VDC, Active- 40mA@12VDC
Sensing RangeUp to 33′ (10m)
Operating Voltage12-30V DC/AC 60Hz, 100mA
Reaction time10ms
IP RatingWeatherproof IP55
Light SourceIR LED/Wavelength 740nm
LEDs – RedSolid, No beam signal, triggered
LEDs – GreenSolid, Good beam signal, properly aligned
LEDsAlternating flash- Poor beam signal
Alarm OutputSPDT relay output (NO/NC/COM)
Switching Capacity500mA@30VAC/VDC
Tamper SwitchN.C., 500mA@30VAC/VDC
Operating Temperature-4º~131º F (-20º~55º C)
EnclosureIP55 Waterproof
Name
Description
Size
Downloads
File
Datasheet
0.4mb
File
Manual
0.6mb