Four-door Access Controller
Features:
System
Main Processor | 32-bit ARM Cortex-M3 |
Memory | 16 MB (32 MB external) |
Input/Output Ports
Inputs | Nine (9) Normally Open, Supervised Inputs, 0 VDC to 5 VDC nominal: • Four (4) Door Sensors • Four (4) Exit Buttons • One (1) Alarm |
Outputs | Five (5) Dry Relays: • Four (4) Lock Relays Form C, 3 A at 24 VDC maximum¹ • One (1) Alarm Relay, Switching Signal Type, 1 A at 24 VDC maximum |
Readers | Four (4) Reader Inputs • 11 VDC to 13 VDC, current limited • 300 mA, maximum per port |
Capacity
Card Holders | 100000 |
Events | 150000 |
Functions
Unlock Modes | Card, Fingerprint, Password, Card + Password, Card or Password, Card + Fingerprint, Fingerprint + Password, and By Period |
User Management | General, VIP, Guest, Patrol, Black List, Duress |
Alarm Function | • Door time-out Alarm • Intrusion Alarm • Duress Alarm • Tamper Alarm |
Schedule Settings | Schedule: 128 Groups Period: 128 Groups Holiday: 128 Groups |
Interface
Reader Compatibility | |
Wiegand Reader Data | 24 AWG, 5 conductor stranded cable without shield, 40.0 m (131.23 ft), maximum |
RS485 Reader Data | 24 AWG, 120 Ω Impedance, 3 conductor stranded cable without shield, 100.0 m (328.08 ft) maximum. Use a separate power supply to extend the RS485 reader data up to 1000.0 m (3280.84 ft), maximum |
Network Compatibility | TCP/IP, RJ-45 (10/100 Mbps) |
Operations
Power Supply | External 9 VDC to 15 VDC, 500 mA Power Supply is Required |
On-board Lithium Battery | 3 V, 220 mAh, CR2032 |
Operating Temperature | –30° C to +60° C (–22° F to +140° F) |
RTC | Support |