PoE Media Converter
The FTP-80x series from Planet Technology is the ideal choice for deployment of remote network equipment. The series implements two technologies:
- Media Conversion: 100Base-FX to 10/100Base-TX
- Power over Ethernet: Power Sourcing Equipment(PSE), PoE Injector
The FTP-80x units are a great choice for a variety of needs and is ideal for industries seeking to deploy PoE for units simply and efficiently.
Installation and Power Management Made Simple
The IEEE 802.3af capabilities of the FTP-80x series cuts down the cost of installation. In addition, the units double as a Power over Ethernet Injector, which offers DC 48V voltage through Ethernet cables. This allows the twisted pair cables through the FTP-80x and IEEE 802.3af compliant powered device or PoE Splitter (such as POE-151S-5V / 12V) to transfer power and data at the same time.
Extend the Length and Range
The FTP-80x allows for the extension of the range of network devices with the innovative Fiber interface. The FTP-80x PoE Media Converters can convert the Ethernet signal to a electrical Ethernet signal which allows two type segments to connect with ease. The unit converts the 10/100Base-TX signal to 100Base-FX signal and offers a range of fiber connection types. The range can be extended up to 15 kilometers and still maintain a transmission performance of 100Mbps. These units operate efficiently in Store and Forward mechanism and stops packet loss with IEEE 802.3x Flow Control (Full-Duplex). With the Link Fault Pass Through function,(LLCF / LLR) and the DIP Switch feature, the unit notifies users of link media issues and offers a dependable solution to monitor the internet. It also allows users to enable or disable the LFP function.
Combined PoE and Media Conversion
The FTP-80x features power and data in a single unit, thus reducing cables. This unit removes the need to find dedicated power outlets in unreachable areas and allows for the free deployment of Security IP Camera and wireless access points. The unit’s saving solutions also make it simple for users to save time and money.
| Interface | |
| Copper | 1-port Fast Ethernet TP interface, auto negotiation, auto-MDI / MDI-X with PoE injector function |
| Fiber | FTP-802 Multi-mode: 50/125µm or 62.5/125µm optical fiber FTP-802S15 Single-mode: 8.3/125, 8.7/125, 9/125µm optical fiber |
| Fiber Port Type (connector) | FTP-802 : SC FTP-802S15 : SC |
| Cable Distance | FTP-802 : 2km FTP-802S15 : 15km |
| Optical Frequency | FTP-802 : 1310nm FTP-802S15 : 1310nm |
| Launch Power(dBm) | FTP-802 : max.-14 min.-19.0 FTP-802S15 : max. -7 min.-20 |
| Receive Sensitivity | FTP-802 : -34.5 FTP-802S15 : -28 |
| Maximum Input Power | FTP-802 : -14 FTP-802S15 : -8 |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3af Power over Ethernet |
| Power Output | PoE 48V DC, max. 15.4 watts, 350mA |
| Power Pin Assignment | 1/2(+) , 3/6(-) |
| Hardware Specifications | |
| Switch Architecture | Store-and-Forward |
| Flow Control | Back pressure for half duplex mode IEEE 802.3x pause frame for full duplex mode |
| LED | System: Power, Status FX / LNK: Data Active, Fiber Link TX / LNK: 10/100 Link / Active PoE in Use: Detects PSE Device |
| Dimensions (H x W x D) | 26 x 70 x 97 mm |
| Weight | 0.2 kg |
| Power Supply | 48V DC, 0.4A external AC-to-DC adapter |
| Operating Temperature | 0~50 degrees C |
| Operating Humidity | 5~90% (non-condensing) |
| LFP Mode | Enable: when either TP port or FX port is broken, shut down the other port Disable: Link LED indicators is still on if connection of the other end is broken |
| Standards Conformance | |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Protocols and Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet |
| Cables | TP: Cat 5/5e UTP cable Fiber: Multi-mode: 50/125µm or 62.5/125µm optical fiber Single-mode: 8.3/125, 8.7/125, 9/125µm optical fiber |
