Access Control Keypad, Built-in Proximity Reader, 1,200 Users, 3 Outputs, Indoors

Features:

• Built-in proximity card reader
• 12~24 VAC/VDC Auto-adjusting operation
• Up to 1,000 possible user codes (000~999) and/or proximity cards programmable for output #1, 100 (001~100) for output #2, and 100 (001~100) for output #3
• Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited time use (1~99 hours)
• Output #1: Form C relay, 1A@30VDC max.
• Output #2: Form C relay, 1A@30VDC max.
• Output #3: Transistor ground, 100mA@24VDC
• Outputs #1, #2, and #3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
• Tamper output: N.C. Dry contact, 50mA@24VDC max.
• Keypad illuminates when a button is pressed; backlight can be programmed for FULL or AUTO in standby mode
• Mounts to a standard single-gang back box (surface-mount back box included)
• All features are programmed directly from the keypad: No need for an external programmer
• EEPROM Memory protects programmed information in case of power loss
• Up to 50 (01~50) duress codes for output #1, 10 (01~09) for output #2, and 10 (01~09) for output #3
• Duress code signals a silent alarm if an authorized user is forced to open the door under duress
• Egress input lets users exit the premises without keying in the code
• Door sensor input for anti-tailgating operation
• Interlocking input for connecting to a second keypad
• Keypad active or alarm output selectable via jumper