Industrial SNMP Switch
Innovative Multiple SFP Fiber Port Switch
The IGS-10080MFT is a state-of-the-art 10-Port Full Gigabit Managed Ethernet Switch that is crafted to help create a stable Gigabit backbone. The backbone can transmit dependable, high speed data in industries that have shifting environments. This also allows for the transmission of data to remote networks through fiber optic. The unit features a 8-Port 100/1000Base-X SFP fiber optic interface and 2 extra 10/100/1000Base-T copper interfaces and is housed in a strong IP30 case with a redundant power system. The unit can operate efficiently in temperatures ranging from -40 to 75°C.
Fully-Functional IPv6 / IPv4 Managed Switch
The IGS-10080MFT from Planet Technology is a choice solution to meet the requirement of IPv6 management Gigabit Ethernet Switches, especially in industrial environments. The unit supports management features for IPv4 and IPv6 management functions. The IGS-10080MFT also includes Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control and authentication, and Secure Management features to maintain industrial and automation network connectivity.
Fast Recovery to a Redundant Ethernet Network
The IGS-10080MFT features the a capability to stop interruptions and any outside intrusion. The unit includes Rapid Spanning Protocol (RSTP), Multiple Spanning Tree (MSTP) and the Loop protection function that shuts down specific Ethernet interfaces when loops are detected by the system. The unit’s dynamic port Link Aggregation and Redundant Power System are to the industrial automation network of customers in order to make system reliability and up time even more dependable. The unit protects industrial networks with the ability to recover the capability to implement fault tolerant ring architectures.
Flexible Solution
The unit features 8 mini-GBIC slots that are built in the IGS-10080MFT. These slots support Dual-Speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, which allows users to choose the right SFP transceiver according to the transmission distance or the transmission speed.
The IGS-10080MFT from Planet Technology is an Industrial 10-port Gigabit Managed Ethernet Switch.
Hardware Specification | |||||
SFP/mini-GBIC Slots | 8 100/1000Base-SX/LX mini-GBIC SFP slots | ||||
Copper Ports | 2 10/100/1000Base-T Ethernet interface | ||||
Switch Architecture | Store-and-Forward | ||||
Switch Fabric | 20Gbps / non-blocking | ||||
Throughput (packet per second) | 14.8Mpps | ||||
Address Table | 8K entries, automatic source address learning and ageing | ||||
Flow Control | IEEE 802.3x Pause Frame for Full-Duplex. Back pressure for Half-Duplex | ||||
Jumbo Frame | 9Kbytes | ||||
Reset Button | < 5 sec: System reboot > 5 sec: Factory Default | ||||
ESD Protection | 6KV DC | ||||
EFT Protection | 6KV DC | ||||
Enclosure | IP30 Aluminum Metal Case | ||||
Installation | DIN Rail Kit and Wall Mount Kit | ||||
Alarm | One relay output for power fail Alarm Relay current carry ability: 1A @ DC 24V | ||||
LED Indicators | System: Power 1 (Green) Power 2 (Green) Fault Alarm (Green) Ring (Green) * R.O. (Green) * Per 10/100/1000T RJ-45 Ports: 1000 (Green) 10/100, LNK/ACT (Orange) Per SFP Interface: 1000 LNK/ACT(Green) 100 LNK/ACT (Orange) | ||||
Dimension (W x D x H) | 72 x 107 x 152mm | ||||
Weight | 1036g | ||||
Power Requirement | DC 12 to 48V, AC 24V Power Adapter | ||||
Power Consumption | 13.92 Watts / 47.76BTU (Full loading) | ||||
Layer 2 function | |||||
Basic Management Interfaces | Web Browser, Remote Telnet, SNMP v1, v2c | ||||
Secure Management Interface | SSH, SSL, SNMP v3 | ||||
Port configuration | Port disable/enable Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection Auto-Detection / Forced 100/1000Mbps SFP Fiber transceiver speed Flow Control disable / enable Power saving mode control | ||||
Port Status | Display each ports speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status | ||||
Port Mirroring | TX / RX / Both Many to 1 monitor | ||||
E.R.P.S. Ring * | Recovery time <20ms | ||||
VLAN | 802.1Q Tagged Based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN MAC-Based VLAN Protocol-Based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4095 VLAN IDs | ||||
Link Aggregation | IEEE 802.3ad LACP / Static Trunk Supports 5 groups of 10-Port trunk | ||||
QoS | Traffic classification based, Strict priority and WRR 8-Level priority for switching – Port Number – 802.1p priority – 802.1Q VLAN tag – DSCP field in IP Packet | ||||
IGMP Snooping | IGMP (v1/v2/V3) Snooping, up to 255 multicast Groups IGMP Querier mode support | ||||
MLD Snooping | MLD (v1/v2) Snooping, up to 255 multicast Groups MLD Querier mode support | ||||
Access Control List | IP-Based ACL / MAC-Based ACL Up to 256 entries | ||||
Bandwidth Control | Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps | ||||
SNMP MIBs | RFC-1213 MIB-II RFC-2236 IGMPv2 RFC-2710 MLDv1 RFC-3376 IGMPv3 RFC-2879 RMON 1, 2, 3, 9 RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMON MIB (Group 1, 2, 3 and 9) RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC3411 SNMP-Frameworks-MIB IEEE 802.1X PAE IF-MIB LLDP MAU-MIB | ||||
Standards Conformance | |||||
Regulation Compliance | FCC Part 15 Class A, CE | ||||
Stability Testing | IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) | ||||
Standards Compliance | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX / 100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP | ||||
Environment | |||||
Operating |
| ||||
Storage |
|