Product |
FGSD-1022 |
FGSD-1022P |
FGSD-1022HP |
Hardware Specification |
|||
10/100Mbps Copper Ports |
8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
1000Mbps Copper Ports |
2 10/100/1000Base-T RJ-45 port |
||
SFP/mini-GBIC Slots |
2 SFP interfaces, shared with Port-9 and Port-10 |
||
Switch Architecture |
Store-and-Forward |
||
Switch Fabric |
5.6Gbps / non-blocking |
||
Switch Throughput |
4.16Mpps@64Bytes |
||
Address Table |
8K entries |
||
Share Data Buffer |
2Mbits |
||
Flash |
4Mbytes |
||
DRAM |
32Mbytes |
||
Maximum Frame Size |
9K Bytes |
||
Flow Control |
Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex |
||
LED |
Power (Green) Link/Activity (Green) 10/100 LNK / ACT(Orange) 1000 LNK / ACT(Green) 10/100 LNK / ACT(Orange) |
Power (Green) Link/Activity (Green) PoE In-Use (Orange) 1000 LNK / ACT(Green) 10/100 LNK / ACT(Orange) |
|
Dimensions ( W x D x H) |
330 x 155 x 44 mm, 1U height |
330 x 155 x 44 mm, 1U height |
|
Weight |
1.2kg |
1.6kg |
1.74kg |
Power Requirement |
100~240V AC, 50-60 Hz |
||
Power Consumption |
16 Watts (Full load) |
140 Watts (Full PoE Load) |
170 Watts (Full PoE Load) |
Operating Temperature |
Standard: 0 ~ 50 Degree C |
||
Operating Humidity |
20% to 95% (Non-condensing) |
||
Storage Temperature |
-10 Degree C ~ 70 Degree C |
||
Layer 2 Functions |
|||
Management Interface |
Console, Telnet, Web Browser, SSL, SNMP v1, v2c, v3 |
||
Port Configuration |
Port disable/enable. Auto-negotiation 10/100Mbps full and half duplex mode selection. Flow Control disable / enable. Bandwidth control and broadcast storm filter on each port. |
Port Status |
Display each port’s speed duplex mode, link status, Flow control status. Auto negotiation status |
||
VLAN |
IEEE 802.1Q Tag-based VLAN, up to 255 VLANs groups, out of 4041 VLAN IDs Port-based VLAN Q-in-Q tunneling GVRP for VLAN Management, up to 128 dynamic VLAN entries Private VLAN Edge(PVE / Protected port) with two protected port groups |
||
Spanning Tree |
IEEE 802.1D Spanning Tree IEEE 802.1S Multiple Spanning Tree, up to 15 instances |
||
Link Aggregation |
Static Port Trunk IEEE 802.3ad LACP (Link Aggregation Control Protocol) Supports 13 groups of 8-Port trunk support |
||
Quality of Service |
4 priority queue Traffic classification based on : · Port-Based priority · 802.1p priority, · IP DSCP/TOS field in IP Packet |
||
IGMP Snooping |
v1 and v2 256 multicast groups and IGMP query |
||
Bandwidth Control |
Per port Ingress / Egress bandwidth control in steps of 128Kbps |
||
Port Mirror |
RX / TX / Both 1 to 1 monitor |
||
Security |
802.1x Port-Based Network access control MAC Limit Static MAC MAC Filtering |
||
Access Control List |
Supports up to 220 rule entries |
||
SNMP MIBs |
RFC-1157 SNMP MIB RFC-1213 MIB-II RFC-1215 Trap RFC-2863 Interface MIB RFC-1493 Bridge MIB RFC-2674 Extended Bridge MIB (Q-Bridge) RFC-1643 RFC-2665 EtherLike MIB RFC-2819 RMON MIB (Group 1, 2, 3,9) RFC-2737 Entity MIB POWER-ETHERNET-MIB |
||
Power over Ethernet |
|||
PoE Standard |
- |
IEEE 802.3af PoE / PSE |
IEEE 802.3af PoE / PSE IEEE 802.3at PoE / PSE |
PoE Power Supply Type |
- |
End-Span |
End-Span |
PoE Power output |
- |
Per Port 48V DC, 350mA . |
Per Port 52V DC, 600mA |