Features:

FGSW-2620VM

• 24-Port 10/100Base-TX RJ-45 interfaces
• 2-Port Gigabit TP/SFP combo interfaces
• Reset button for system management

FGSW-2620PVM

• 24-Port 10/100Base-TX RJ-45 with PoE Injector
• 2-Port Gigabit TP/SFP combo interfaces
• Reset button for system management
• 1 RS-232 male DB9 console interface for Switch basic management and setup
• Layer 2 Features
  • Complies with the IEEE 3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
  • Supports Auto-negotiation and Half-Duplex / Full-Duplex modes for all 10Base-T / 100Base-TX and Full-Duplex mode for 1000Base-T
  • Auto-MDI/MDI-X detection on each RJ-45 port
  • Prevents packet loss Flow Control:
    • IEEE 3x PAUSE frame Flow Control for Full-Duplex mode
    • Back-Pressure Flow Control in Half-Duplex mode
  • High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • 8K MAC Address Table, automatic source address learning and ageing
  • Support VLANs:
    • IEEE 1Q Tag-Based VLAN
    • Up to 255 VLANs groups, out of 4096 VLAN IDs
    • Port-Based VLAN
    • Q-in-Q tunneling (Double Tag VLAN)
  • Supports Link Aggregation
    • Up to 13 Trunk groups
    • Up to 8 ports per trunk group with 6Gbps bandwidth (Full Duplex mode)
    • IEEE 3ad LACP (Link Aggregation Control Protocol)
    • Cisco ether-Channel (Static Trunk)
  • Support Spanning Tree Protocol:
    • STP, IEEE 1D (Classic Spanning Tree Protocol)
    • RSTP, IEEE 1w (Rapid Spanning Tree Protocol)
• Quality of Service
  • 4 priority queues on all switch ports
  • Traffic classification:
    • IEEE 1p Class of Service
    • IP TOS / DSCP code priority
    • Port Base priority
  • Strict priority and weighted round robin (WRR) CoS policies
  • Ingress/Egress Bandwidth control on each port
• Multicast
  • IGMP Snooping v1 and v2
  • IGMP Query mode for Multicast Media application
  • 256 multicast groups
• Security
  • Layer 2 / 3 / 4 Access Control List (ACL)
  • IEEE 1x Port-Based Authentication
  • MAC address Filtering and MAC address Binding
  • IP address security management to prevent unauthorized intruder
  • Port Mirroring to monitor the incoming or outgoing traffic on a particular port
• Management
  • Switch Management Interface
    • Web switch management
    • Telnet Command Line Interface
    • SNMP v1, v2c switch management
    • Console local management ( FGSW-2620PVM only)
  • SNMP Trap for alarm notification of events
  • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Firmware upload / download via TFTP or HTTP
  • Configuration upload / download via TFTP or HTTP
  • Supports Ping function
• Power over Ethernet (FGSW-2620PVM Only )

• Complies with IEEE 3af Power over Ethernet End-Span PSE
• Up to 24 IEEE 3af devices powered
• Support PoE Power up to 4 watts for each PoE ports
• Auto detect powered device (PD)
• Circuit protection prevent power interference between ports
• Remote power feeding up to 100m
• PoE Management
  • Total PoE power budget control
  • Pert port PoE function enable/disable
  • PoE Port Power feeding priority
  • Per PoE port power limit
  • PD classification detection