5-Port Ethernet Switch
Compact Size for More Practicability and Convenience
PLANET’s ISW-500T Industrial 5-Port 10/100TX compact Ethernet switch is suitable for industrial use, features 5 10/100Mbps auto-negotiation ports, IP30-rated compact case and a wide-ranging redundant power system (12~48V DC or 24V AC). The ISW-500T is able to operate in harsh environments with operating temperatures ranging from -40 to 75°C. The ISW-500T includes a ‘Plug and Play’ feature that is designed for easy deployment of industrial networks and the IIoT (Industrial Internet of Things). It is also stable and reliable when it comes to fast data and power transmission.
Low Power Consumption for Green Networking
The ISW-500T provides the link-on cable length power saving and link-down power saving methods. These features allow the ISW-500T to consume very low amounts of power in full loading operation mode, which helps conserve energy and maintains high performance.
With the ‘Auto Power Saving’ and IEEE 802.3az Energy Efficient Ethernet (IEEE) Protocol, the ISW-500T can automatically detect cable link status and network traffic and is able to adjust power consumption accordingly. It enables the switch to use less power when it is less active.
Dual Power Input for High Availability Network System
The ISW-500T features a dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) which is incorporated into a customers automation network to enhance system reliability and uptime. When power supply 1 fails to work, the hardware failover function will be automatically activated to continue powering the ISW-500T via power supply 2.
Robust Protection
The ISW-500T provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protect a users network from ESD attacks, making sure the flow of operation does not fluctuate.
High Switch Performance
The ISW-500T offers a high-performance switch architecture. With 5 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps and a 1K MAC address table, the ISW-500T can perform a wire-speed packet transfer without the risk of packet loss. The flow control function enables the ISW-500T to provide a fast and reliable data transfer.
Plug and Play
The ISW-500T’s RJ45 copper interfaces support 10/100Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
The ISW-500T Industrial 5-Port 10/100TX compact Ethernet switch is suitable for industrial use, features 5 10/100Mbps auto-negotiation ports, IP30-rated compact case and a wide-ranging redundant power system (12~48V DC or 24V AC).
Features:
- Ports: 5 10/100TX
- Type of Switch: Unmanaged
- Switch Fabric: 1Gbps / non-blocking
- Max. Power Consumption: 1.1W / 3.77BTU (power on w/0 any connection), 2W/6.86BTU (full loading)
- Throughput: 0.74Mpps 64Bytes
- Operating Temperature: -40 to 75°C
- TAA Compliant
| Hardware Specifications | |
| Copper Ports | 5 10/100BASE-TX RJ45 auto-MDI/MDI-X ports |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 1Gbps (non-blocking) |
| Throughput (packet per second) | 0.74Mpps@ 64 bytes |
| Address Table | 1K entries, automatic source address learning and aging |
| Shared Data Buffer | 448K bits |
| Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
| ESD Protection | 6KV DC |
| Enclosure | IP30 metal case |
| Installation | DIN rail kit and wall-mount kit |
| Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 |
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC |
| LED Indicator | System: Power 1 (Green) Power 2 (Green) Fault Alarm ( Red ) Per 10/100TX RJ45 Ports: 10/100 LNK/ACT (Green) |
| Dimensions (W x D x H) | 70 x 104 x 30 mm |
| Weight | 255g |
| Power Requirements | Dual 12~48V DC, 24V AC |
| Power Consumption | Max. 1.1 watts/3.77BTU (Power on without any connection) Max. 2 watts/6.86BTU (Ethernet full loading) |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3x flow control and back pressure IEEE 802.1p Class of Service IEEE 802.1X Port Authentication Network Control IEEE 802.3az Energy Efficient Ethernet (EEE) |
| Environment | |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
