The ISW-514PSF provides power to four PoE compliant units at a distance of up to 100 meters using the 4-pair Cat 5 / 5e UTP wire.
Features:
- Ports: 5 10/100TX
- Console Port: No
- Type: Managed
- PoE Ports: 4
- Standards: 802.3af
- Max Power per port: 15.4 Watts
- Operating Temperature: -10 to 60°C
- TAA Compliant
POE Fast Ethernet Switch
The ISW-514PS series provides power to four PoE compliant units at a distance of up to 100 meters using the 4-pair Cat 5 / 5e UTP wire. This PoE feature is used for ethernet devices for industries that contain harsh or demanding environments.
This series offers data and PoE in one single unit, which removes the need for cables and electrical power outlets that are dedicated for a single unit. It also eliminates the need for cabling in difficult out of reach areas, such as ceilings or in walls. This series features a wire that allows data and power to be sent through a single cable, which cuts down the cost for installation and the effort of installation. In addition, these units support 24V DC or 48V DC, which makes it more compatible with a large selection of IEEE 802.3af PoE applications for industries. This feature makes this series at Planetechusa.com superior above standard industrial equipment.
The ISW-514PS series features the ability for extension of distance without barriers. The ISW-514PS series allows for ability to extend transportation, surveillance, manufacturing, and security connections with ease. This series provides switch options:
- ISW-514PS works within 2 km with 4 10/100Mbps UTP ports and 1 100FX SC interface
- ISW-514PS15 is compatible within 15km with 4 10/100Mbps UTP ports and 1 100FX SC interface
- ISW-514PSF is compatible with 4 10/100Mbps UTP ports and 1 100FX LC interface with the option of a Single-Mode or Multi-Mode SFP module
The ISW-514PS series features built-in Web-Based management, which makes it an extremely easy to use interface for configuration. The management interface also makes this series very easy to control. The web interface allows for control over the PoE power provision. This series also includes Web Smart features such as bandwidth control, 802.1Q VLAN, Alert Trap Configuration, Port Management, PoE Configuration, and QoS, among others. It is a money-saving way to manage your network via the internet at any location. The series also features a design which makes it resistant to electrical interference. The durable aluminum case on these units allows for quick cooling and allows the switch to run smoothly in the hardest conditions. These units also work well in temperatures of -10 to 60°C. This tough switch can be placed in virtually any environment and provides power supply inputs that are dual-redundant, reversible polarity 24V DC or 48V DC inputs.
| Hardware Specifications | |
|---|---|
| 10/100Base-TX Ports | 4 |
| 100Base-FX Port | 1 |
| Fiber Port Type | ISW-514PS: Multi-Mode ISW-514PS15: Single Mode ISW-514PSF: Vary on SFP |
| Connector Type | ISW-514PS: SC ISW-514PS15: SC ISW-514PSF: SFP |
| Maximum Distance | ISW-514PS: 2km ISW-514PS15: 15km ISW-514PSF: Vary on SFP |
| Optical Frequency | ISW-514PS: 1300nm ISW-514PS15: 1310nm ISW-514PSF: Vary on SFP |
| Launch Power (dBm) | ISW-514PS: Max.:-14 ??Min.:-20 ISW-514PS15: Max.: 0 ??Min.: -20 ISW-514PSF: Vary on SFP |
| Receive Sensitivity (dBm) | ISW-514PS: -32 ISW-514PS15: -32 ISW-514PSF: Vary on SFP |
| IEEE 802.3af PoE Ports | 4 |
| Dimensions (D x W x H) | 135 x 87.8 x 56 mm |
| Weight | 871g |
| Power LED | Power1, Power2 and Fault Port 1~4: PoE in-use, LNK/ACT Port 5: LNK/ACT |
| Power Requirements | 24 or 48V DC, redundant power with polarity reverse protection function |
| Enclosure | IP-30 aluminum metal case |
| Protection | ESD (Ethernet): 6KV DC Surge (Power): 6KV DC |
| Installation | DIN rail kit and wall mount ear |
| Alarm | One relay output for power failure Alarm relay current carry ability: 1A @ DC 24V |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply Type | End-Span |
| PoE Power Output | Per Port 48V DC, 350mA . max. 15.4 watts |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| Switch Specifications | |
| Switch Processing Scheme | Store-and-Forward |
| Switch Fabric | 1Gbps |
| Throughput (packet per second) | 0.74Mpps@64bytes |
| Address Table | 1K entries |
| Maximum Frame Size | 1536 Bytes |
| Pack Buffer | 512k bits |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Network cables | 10/100Base-TX: 4-Pair UTP Cat. 3, 4, 5, 5e, 6 (100meters, max.) EIA/TIA-568 100-ohm STP (100meters, max.) 100Base-FX: Multi-Mode optic fiber 62.5/125?m or 50/125?m Single-Mode optic fiber 9/125?m |
| Layer 2 Function | |
| Management | Web management, SNMP Trap |
| VLAN | Port-based VLAN IEEE 802.1Q Tag-based VLAN, Up to 16 VLAN groups |
| QoS | 2 priority queues for three type of Class of Service Port-based IEEE 802.1p priority tag TCP/IP headers DSCP classifier Weighted Round Robin queue scheduling |
| Bandwidth Control | Inbound Rate Limit and Outbound Traffic shaping |
| Storm Control | Disable, 12.5%, 25%, 50%, 62.5% 4 levels |
| Security | Supports 5 IP addresses that have permission to access the Switch |
| Standards Conformance | |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (Free Fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
| Standard Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging |
| Environment | |
| Temperature | Operating: -10~60 degrees C Storage: -40~85 degrees C |
| Humidity | Operating: 5~90% Storage: 5~90% (non-condensing) |
