The LRP-104CET, a PLANET Long Reach PoE solution, is an industrial-grade Single-port Long Reach PoE to 4-port 802.3af/at PoE Extender delivered in an IP30 rugged strong case.

• Copper Ports: 4 x 10/100BASE-TX RJ45
• PoE Ports: 4 802.3at/af shared
• Connectivity: 1 x BNC female LRP over Coax PD, 1 x RJ45 LRP over UTP PD
• Power Output: 52V DC
• Total Power Budget: 130W / 446BTU max.
• Distance: Up to 1,000m
• TAA Compliant

4-Port PoE Extender

PLANET’s Long Reach PoE solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote 802.3af/at PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet.

Perfect 1-to-4 PoE over Coaxial/UTP Extender in Harsh Environment

PLANET’s Long Reach PoE solution, the LRP-104CET, is an industrial-grade single-port Long Reach PoE to 4-port 802.3af/at PoE Extender housed in an IP30 rugged strong case. It features long-range data and power transmission over any existing coaxial, UTP, twisted-pair cable or telephone wires for distance up to 1,000m. It converts power to standard 802.3af/at PoE over another 100-meter Ethernet cable connected to four remote PoE PDs at the same time. The LRP-104CET provides many applications for configuration-free operations and deployment in climatically demanding environments with wide temperature range from -20 to 70°C. It makes the installation of remote PoE powered devices easier and more efficient.

IP Ethernet and Power over Long Distance

The LRP-104CET is a Long Reach PoE solution that allows the customer to run less cables and provides flexible network applications that do not require an external power adapter.

PoE networking can be extended well over the 100 meter UTP cable limit with the LRP-104CET. When paired with a LRP injector or LRP switch (over 75 ohm coaxial cable or up to 400 meters) the distance of the PoE network can be extended up to 1,000 meters (3,280ft.). This will not affect the quality of video transmission. Thus, it eliminates the need for an additional electrical outlet as its single power source can provide power to a PoE PD at long range via the LRP-104CET.

Two Types of Power Input: Remote LRP Power through BNC/RJ45 and Local Power

In the Long Reach PoE mode, the LRP-104CET’s PoE budget depends on the output of the Long Reach PoE Injector or Long Reach Switch, but with External DC Power input, it is possible to increase the PoE budget up to 120W. It means the four IEEE 802.3at PDs (powered device) can be powered by the LRP-104CET. It also features a strong dual power input system (Dual 24V~48V DC) incorporated into customer’s automation network to enhance system reliability and uptime.

Configure-free Installation

The LRP-104CET can be used immediately without configuration and is also compliant with many IP network protocols. The diagnostic LEDs and PoE Power Usage LEDs on the front panel show the operating status of the individual port and the whole system. The DIP switch can control PoE output of each port by turning ON or OFF, enabling the administrator to efficiently manage the network.

Stable Operating Performance under Difficult Environments

PLANET’s Long Reach PoE Extender is the perfect solution for extended data and power transmission for warehouses, parking lots, campuses, casinos, and more. It can operate stably under temperature ranges from -20 to 70°C which enables the users to conveniently apply the device in any harsh environment. Without the problem of power sources, it makes the installation of remote PoE powered devices easier and more efficient.