Wireless Access Point
Ultra-high-speed, Enterprise Wireless LAN Solution
PLANET’s WDAP-C7200E 1200Mbps Dual Band 802.11ac Wireless AP supports central management through PLANET AP controllers. With IEEE 802.11ac 2T2R dual-band technology, the WDAP-C7200E provides a maximum wireless speed of 867Mbps at 5GHz and 300Mbps at 2.4GHz.
Powerful Dual-band WLAN Solution
PLANET’s WDAP-C7200E, adopting the IEEE 802.11ac standard, provides a high-speed transmission of power and data, meaning two remote nodes in the 5GHz frequency band can be bridged. The 2.4GHz wireless connection can also be used simultaneously. Furthermore, the WDAP-C7200E adopts the high-class Qualcomm Atheros SoC (System-on-a-Chip), which provides higher stability to meet the stringent requirements of the solution.
Advanced Security and Rigorous Authentication
The WDAP-C7200E supports 128-bit WEP, WPA / WPA2, WPA-PSK and WPA2-PSK wireless encryptions, the advanced WPA2-AES mechanism and 802.1X RADIUS authentication, which can effectively prevent eavesdropping by unauthorized users or bandwidth occupied by unauthenticated wireless access. Furthermore, any users are granted or denied access to the wireless LAN network based on the ACL (Access Control List) that the administrator pre-established. For management purposes, the IEEE 802.1Q VLAN supported allows multiple VLAN tags to be mapped to multiple SSIDs to distinguish the wireless access.
Ceiling-mount Design for Your Environment
With the standard IEEE802.3at Power over Ethernet (PoE) design, the WDAP-C7200E can be easily installed in the areas where power outlets are not available. By supporting the standard IEEE 802.3at PoE PD power scheme, the WDAP-C7200E can be powered and networked by a single UTP cable, effectively eliminating the needs of dedicated electrical outlets on the ceiling and reducing the cabling cost. Furthermore, the system administrator is able to arrange the PoE schedule of the WDAP-C7200E by working with the managed PoE switch.
Easy Installation and Management
With user-friendly Web UI and step-by-step Quick Setup Wizard, the WDAP-C7200E is easy to install, even for users who never experience setting up a wireless network. Furthermore, you can simply install our software controller, PLANET SAPC (Smart AP Control), to deliver wireless profiles to multiple APs simultaneously, thus making the central management simple.
The WDAP-C7200E 1200Mbps Dual Band 802.11ac Wireless AP supports central management through PLANET AP controllers and provides a maximum wireless speed of 867Mbps at 5GHz and 300Mbps at 2.4GHz.
Features:
- Standard: IEEE 802.11a/b/g/n/i/ac
- Antenna: 4 x Internal 5dBi (2.4G x 2, 5G x 2)
- Max. Range: 2.4GHz: 2.412~2.462GHz, 5GHz: 5.180~5.700GHz
- Max. Transmit Power: 29 ± 1dBm
- Network Interface: 2 x 10/100/1000TX
- PoE: 802.3at PoE
- Power System: 802.3at PoE+ or 12V DC, 1.5A
- Operating Temperature: 0º to 40ºC
- FREE Wireless AP Controller App Download HERE
- TAA Compliant
| Hardware Specifications | |
| Interfaces LAN | 2 x 10/100/1000BASE-T RJ45 port Auto-negotiation and Auto MDI/MDI-X |
| Antennas Gain | 4 x Internal 5dBi antenna (2.4G x2, 5G x2) |
| Reset Button | Reset button on the rear side (Press over 15 seconds to reset the device to factory default) |
| LED Indicators | SYS, 2.4G, 5G |
| Dimensions (W x D x H) | 198 x 32.9 x198 mm |
| Weight | 498 ±5g |
| Power Requirements | 48V 0.5A, IEEE 802.3at PoE+ or 12V DC, 1.5A |
| Power Consumption | < 20W |
| Mounting | Ceiling Mount |
| Wireless Interface Specifications | |
| Standard | IEEE 802.11ac IEEE 802.11n IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow control |
| Media Access Control | CSMA/CA |
| Data Modulation | 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) 802.11b: DSSS (DBPSK / DQPSK / CCK) |
| Band Mode | 2.4G / 5G concurrent mode |
| Frequency Range | 2.4GHz: FCC: 2.412~2.462GHz ETSI: 2.412~2.472GHz5GHz: FCC: 5.180~5.240GHz, 5.745~5.825GHz ETSI: 5.180~5.700GHz |
| Operating Channels | FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165 (9 Channels) ETSI: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 (16 Channels)*5GHz channel list will vary in different countries according to their regulations. |
| Max. Transmit Power (dBm) | FCC: up to 29 ± 1dBm ETSI: < 20dBm (EIRP) |
| Receive Sensitivity | 2.4GHz: 802.11b(1Mbps):-99dBm 802.11b(11Mbps):-92dBm 802.11g(6Mbps):-95dBm 802.11g(54Mbps):-82dBm 802.11n HT20(MCS0/MCS8):-95dBm 802.11n HT20(MCS7/MCS15):-77dBm 802.11n HT40(MCS0/MCS8):-93dBm 802.11n HT40(MCS7/MCS15):-75dBm5GHz: 802.11a(6Mbps):-92dBm 802.11a(54Mbps):-75dBm 802.11n HT20(MCS0/MCS8):-91dBm 802.11n HT20(MCS7/MCS15):-72dBm 802.11n HT40(MCS0/MCS8):-88dBm 802.11n HT40(MCS7/MCS15):-70dBm 802.11ac VHT20(MCS0):-92dBm 802.11ac VHT20(MCS8):-70dBm 802.11ac VHT40(MCS0):-89dBm 802.11ac VHT40(MCS9):-65dBm 802.11ac VHT80(MCS0):-87dBm 802.11ac VHT80(MCS9):-61dBm |
| Software Features | |
| LAN | Static IP Supports IP-MAC binding |
| WAN | – Static IP – Dynamic IP – PPPoE |
| Wireless Mode | – Access Point – Gateway – Repeater – WDS (PtP/PtMP) |
| Channel Width | 20MHz, 40MHz, 80MHz |
| Encryption Security | 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X |
| Wireless Security | Enable/Disable SSID Broadcast Wireless MAC address filtering User Isolation |
| Max. SSIDs | 4 |
| Max. Clients | 64 per radio (50 is suggested, depending on usage) |
| Max. WDS Peers | 4 |
| Wireless QoS | Supports Wi-Fi Multimedia (WMM) |
| Wireless Advanced | WMM (Wi-Fi Multimedia): 802.11e Wireless QoS Multiple SSID: up to 4 at 2.4GHz and 5GHz, respectively Wireless Isolation: Enables to isolate each connected wireless client from communicating with each other Provides Wireless Statistics |
| Wireless Advanced | Auto Channel Selection 5-level Transmit Power Control (100%, 75%, 50%, 25%, 12.5%) Client Limit Control, Coverage Threshold Wi-Fi channel analysis chart |
| Status Monitoring | Device status, Wireless client List PLANET Smart Discovery DHCP client table System Log supports remote syslog server |
| VLAN | IEEE 802.1Q VLAN (VID: 3~4094) SSID-to-VLAN mapping up to 4 SSIDs |
| Self-healing | Supports auto reboot settings per day/hour |
| Management | Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through SNMP v1/v2c/v3 support, MIB I/II, Private MIB |
| Central Management [1] | Applicable controllers: WAPC-500, WAPC-1000 and Smart AP Control(SAPC) *Remarks[1]: the feature will be supported through firmware/system upgrade. |
| Environment & Certification | |
| Temperature | Operating: 0 ~ 40 degrees C Storage: -40 ~ 70 degrees C |
| Humidity | Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 90% (non-condensing) |
| Regulatory | CE, RoHS |
