Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security, both indoors and outdoors.
Features:
Max. range (outdoor) | 90′ (30m) |
Max. range (indoor) | 190′ (60m) |
Current draw | 50mA max. (laser alignment only)
150mA max. (active operation excluding laser alignment) |
Operating Voltage | 12~30 VDC/VAC 60Hz, 200mA |
Detection method | Simultaneous breaking of 2 beams |
Interrupt speed | 10ms |
Trigger output | SPDT NO/NC/COM relay, 1A@30 VDC/VAC, with built-in 10kΩ resistor on N.O. output |
Tamper output (TX & RX) | N.C. switch, 1A@30 VDC/VAC |
Sensor LED (RX) | Red LED – ON: When the transmitter and receiver are not aligned or the beam is broken. |
Signal LED (RX) | Yellow LED – ON: When the receiver’s signal is weak or the beam is broken. |
Power LED (TX & RX) | Green LED ON: Indicates connected to power |
Laser wavelength | 650nm |
Laser output power | <5mW |
Alignment angle | Horizontal: ±90°, Vertical: ±5° |
Operating temperature | -13°~131° F (-25°~55° C) |
Weight | 2.5-lb (1.1kg) |
Case | PC Resin |