The TMC-GSFP electrical-to-optical Ethernet media converter interfaces between 10/100/1000 Mbps electrical signal and a 100/1000 Mbps optical output, selectable by dip switch. “Auto-Negotiating” is supported on the copper interface side. These devices use either one or two optical fibers, depending upon the selection of sold-separately SFP optical module. The TMC-GSFP may be directly plugged into the SBP-C14 / SBP-C03 Rack or operated as a standalone module.
Features:
| Data | Electrical & Mechanical | |||
| Data Interface | Ethernet | LED Indicators | › Optical Link/Data Activity › Power | |
| Data Rate | 10/100/1000 Mbps | › POE Enabled (TMC-GSFPPOEM only) | ||
| IEEE 802.3 Compliant | Circuit Board | Meets IPC Standard | ||
| Full Duplex or Half Duplex Electrical Port/ Full | ComFit Size | 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm) | ||
| Duplex Optical Port | ComFit Rack Slots | 1 | ||
| Connectors | Mini Size | 3.3 x 2.5 x 1.1 in (8.4 x 6.4 x 2.8 cm) | ||
| Shipping Weight | <2 lbs./0.9 kg | |||
| Power | Terminal Block | |||
| Optical | SFP dependent | Environmental | ||
| Electrical | RJ45 | MTBF | >100,000 hours | |
| Fibers¹ | SFP Dependent | Operating Temp | -40˚ C to +75˚ C | |
| Fiber Connectors | Requires selection of sold-separately SFP modules. | Storage Temp | -40˚ C to +85˚ C | |
| See Hanwha Techwin Wisenet SFP datasheet for | Relative Humidity | 0% to 95% (non-condensing) | ||
| model and description of SFP modules. | [1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. | |||
| Power | Single mode fiber needs to meet or exceed fiber standard ITU-T G.652 | ||
| Operating Voltage Range | TMC-GSFP / TMC-GSFPM: 9-24 VDC |
| or 24 VAC | |
| TMC-GSFPPOEM: 48 – 57 VDC @ 0.85A | |
| Power Consumption | TMC-GSFP / TMC-GSFPM:2.5W |
| TMC-GSFPPOEM: 35W (with full PoE+ load) | |
| Current Protection | Automatic Resettable Solid-State Current Limiters |