Phone number: 888-369-2288
My Quote
0 items

Home  —  Brands  —  Vivotek  —  Accessories  — 
Vivotek - MDR-10-12 - 10W Single Output Industrial DIN Rail Power Supply, 12V
Vivotek - MDR-10-12 - 10W Single Output Industrial DIN Rail Power Supply, 12V
Part number:
MDR-10-12
Price:
Dealers only
Add to Quote/Project Registration
Description Specifications Downloads

10W Single Output Industrial DIN Rail Power Supply, 12V.

 

Features:

  • 85~264VAC In, 12VDC/10W Out
  • Operating temperature: - 20 ℃ ~ 70 ℃
  • Industrial media converter: AW-IHS-0200, AW-IHS-0201, AW-IHS-0203
MODEL MDR-10-12 

 

 

 

 

 

OUTPUT 

DC VOLTAGE 12V 
RATED CURRENT 0.84A 
CURRENT RANGE 0 ~ 0.84A 
RATED POWER 10W 

RIPPLE & NOISE (max.) Note.2 

120mVp-p 

VOLTAGE TOLERANCE Note.3 

±3.0% 
LINE REGULATION ±1.0% 
LOAD REGULATION ±3.0% 
SETUP, RISE TIME                               Note.5 500ms, 30ms/230VAC  1000ms, 30ms/115VAC at full load 
HOLD UP TIME (Typ.) 120ms/230VAC 25ms/115VAC at full load 

 

 

 

INPUT 

VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC 
FREQUENCY RANGE 47 ~ 63Hz  
EFFICIENCY (Typ.) 81%  
AC CURRENT (Typ.) 0.33A/115VAC 0.21A/230VAC 
INRUSH CURRENT (Typ.) COLD START 35A/115VAC  70A/230VAC 
LEAKAGE CURRENT <1mA / 240VAC 

 

 

PROTECTION 

OVERLOAD Above 105% rated output power 
Protection type : Hiccup mode, recovers automatically after fault condition is removed 

 

OVER VOLTAGE 

13.8 ~ 16.2V 
Protection type : Shut down o/p voltage, re-power on to recover 
FUNCTION DC OK ACTIVE SIGNAL (max.) 9 ~ 13.5V / 40mA 

 

 

ENVIRONMENT 

WORKING TEMP. -20 ~ +70℃ (Refer to "Derating Curve") 
WORKING HUMIDITY 20 ~ 90% RH non-condensing 
STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH 
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) 
VIBRATION Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 

 

SAFETY & 

EMC 

(Note 4) 

SAFETY STANDARDS UL508, TUV EN60950-1 approved 
WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC 
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH 
EMC EMISSION Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 
EMC IMMUNITY Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024,EN61000-6-1,EN61204-3, light industry level, criteria A 
OTHERS MTBF 584K hrs min.  MIL-HDBK-217F (25℃) 
DIMENSION 22.5*90*100mm (W*H*D) 
PACKING 0.17Kg; 72pcs/13.2Kg/0.91CUFT 
NOTE 
  1. All parameters NOT Specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature. 
  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor
  3. Tolerance: includes set up tolerance, line regulation and load regulation. 
  4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets      EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI” testing of component power supplies.” 5. Length of set up time is measured at cold first start. Turning ON/OFF power supply may lead to increase to the set up time. 
Name
Description
Size
Downloads
File
Datasheet
0.2mb