Planet - GSD-1008HP - 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Desktop Switch, 120W PoE Budget
Product Overview
The Planet GSD-1008HP is an unmanaged desktop PoE+ switch with 8 Gigabit PoE+ ports (120W budget), 2 Gigabit uplinks, and 20 Gbps switching capacity. It offers DIP switch modes (Standard, VLAN, and Extend for 250m transmission at 10Mbps with 20W PoE), PD alive check, and a compact metal housing with 10-inch rackmount support.
Key Configuration
• Copper ports: 8 × 10/100/1000BASE-T PoE+ (ports 1–8), 2 × 10/100/1000BASE-T uplink (ports 9–10).
• PoE budget: 120W total; per-port output: up to 30W (55V DC, 540 mA).
• Switch fabric: 20Gbps non-blocking; throughput: 14.88 Mpps.
• MAC table: 8K entries; jumbo frame: up to 9K bytes.
• Dimensions: 220 × 150 × 43 mm (1U); weight: 1260 g.
Key Features
The Planet GSD-1008HP is a compact unmanaged PoE+ switch with 8 Gigabit PoE+ ports (120W budget), 2 Gigabit uplinks, and 20 Gbps capacity. It offers DIP switch modes (Standard, VLAN, and Extend up to 250m at 10Mbps with 20W PoE), PD alive check, Energy Efficient Ethernet, TAA compliance, metal housing with 10-inch rackmount support, a cooling fan, and FCC/CE certifications.
Installation Notes
The measures 220 × 150 × 43 mm (8.66 × 5.91 × 1.69 in.), weighs 1260 g (2.78 lb), and supports both desktop and 10-inch rackmount installation. It operates from 0°C to 50°C with 5–95% RH (non-condensing) and stores from -10°C to 70°C. Powered by 100–240V AC at 2.5A, it consumes 5.6W for the system and up to 139W with a full PoE load, with a single fan for cooling. LED indicators include Power (Green), 10/100 LNK/ACT (Red), 1000 LNK/ACT (Green), and PoE-in-Use (Orange) per port.
| Hardware Specifications | |
| Copper Port | 10 10/100/1000BASE-T MDI/MDIX Ports |
| PoE Injector Port | 8-port with 802.3at/af PoE injector function with Port-1 to Port-8 |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 20Gbps/non-blocking |
| Switch Throughput@64 bytes | 14.88Mpps@64 bytes |
| MAC Address Table | 8K entries, automatic source address learning and aging |
| Maximum Frame Size | 9K bytes |
| Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
| LED | System:
10/100/1000BASE-T RJ45 interfaces:
PoE interfaces:
|
| DIP Switch | Selectable operation mode
|
| Dimensions (W x D x H) | 220 x 150 x 43 mm (1U height) |
| Enclosure | Metal |
| Weight | 1260 g |
| Power Requirements | AC 100~240V, 50/60Hz, 2.5A max. |
| Power Consumption/ Dissipation | System On: Max. 5.6 watts/19.1 BTU Ethernet Full Loading: Max 10.6 watts/36.1 BTU PoE Full Loading: Max. 139 watts/474.2 BTU |
| Thermal Fan | 1 |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per port 55V DC, 540mA. max. 30 watts |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Budget | 120 watts |
| Max. Number of Class 2 PDs | 8 |
| Max. Number of Class 3 PDs | 8 |
| Max. Number of Class 4 PDs | 4 |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az Energy Efficient Ethernet (EEE) |
| Environment | |
| Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
