The ACTi KCM-3311 is a 4MP IP day/night dome camera designed for detailed indoor surveillance and efficient video streaming. It combines a 1/3.2" progressive scan CMOS sensor, 3.6x zoom P-Iris lens, WDR, motion detection, privacy masking, and PoE support.
4 Megapixel dome camera with 2032 x 1920 maximum resolution; 3.3-12mm / F1.4-2.9 P-Iris zoom lens with 3.6x optical zoom; supports H.264, MPEG-4 SP, and MJPEG compression formats.
• Records up to 8 fps at 2032 x 1920 and 15 fps at 1920 x 1080
• Day/night operation with mechanical IR cut filter
• Low-light sensitivity of 0.1 lux in color and 0.05 lux in monochrome at F1.4
• Advanced WDR rated at 80 dB improves imaging in difficult lighting
• Supports up to 4 regions of interest, 4 privacy mask regions, motion detection, and PoE
The P-Iris lens automatically adjusts incoming light to help maintain sharpness and depth of field. Region-of-interest streaming allows selected areas of the full image to be treated as independent channels, helping reduce bandwidth and recording load when only specific zones require continuous capture.
Power over Ethernet allows power and data to be carried over a single Ethernet cable, simplifying installation where a nearby power outlet is not available.
| Product Profile | |
| Product Type | Zoom Dome |
| Application Environment | Indoor |
| Maximum Resolution | 4MP |
| Image Sensor | Progressive Scan CMOS |
| Sensor Size | 1/3.2 " |
| Effective Pixels | 2592(H) X 1944(V) (5.04 MP) |
| Low Light Sensitivity | Superior |
| Minimum Illumination | Color: 0.1 lux at F1.4 (30 IRE , 2400 K); B/W: 0.05 lux at F1.4 (30 IRE, 2400 K) |
| Mechanical IR Cut Filter | Yes |
| IR Sensitivity Range | 700-1100nm |
| Color to B/W Switch | ISP based switch, configurable |
| Electronic Shutter | 1/5-1/2000 second (manual mode); 1/5-1/10000 second (auto mode) |
| Horizontal Resolution (TV Lines) | 1422 TVL |
| Lens | |
| Focal Length | Zoom, f3.3-12mm |
| Aperture | F1.4-F2.9 |
| Zoom Ratio | 3.6x optical zoom |
| Iris | P-Iris |
| Focus | Auto focus |
| Lens Mount | Board mount |
| Horizontal Viewing Angle | 77.2° - 22.6° |
| Video | |
| Compression | H.264 (Baseline), MPEG-4 SP, MJPEG |
| Maximum Frame Rate vs. Resolution | 8 fps at 2032 x 1920 15 fps at 1920 x 1080 30 fps at 1280 x 720 30 fps at 640 x 480 |
| Bit Rate | 28Kbps - 6Mbps |
| Bit Rate Mode | Constant, Variable |
| Multi-Streaming | Simultaneous dual streams based on two configurations Multiple streams based on a single configuration in 4 cropped VGA mode |
| Digital Noise Reduction | 2D + 3D DNR |
| Wide Dynamic Range | Advanced WDR (80 dB) |
| Image Orientation | Flip, Mirror |
| Image Enhancement | White Balance, Brightness, Saturation, Contrast, Sharpness, Automatic gain control (AGC), Flickerless, Defogging |
| Privacy Mask | 4 configurable regions |
| Text Overlay | Yes |
| Server-based Analytics | Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy) |
| Network | |
| Network Protocol & Service | IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, ToS, SNMP, IEEE 802.1X |
| Ethernet Port | 1 x RJ-45 connector |
| Security | IP address filtering, HTTPS encryption, Password protected user level, IEEE 802.1X network access control |
| Event | |
| Event Trigger | Video motion detection (3 regions), |
| Event Response | Notify control center, Go to Zoom preset point or preset tour, Change camera settings, Command other devices, E-mail notification with snapshots, Save video or snapshot to storage, Upload video or snapshot to FTP server |
| Integration | |
| Unified Solution | Fully compatible with ACTi software |
| Software Development Kit | Yes |
| ONVIF Compliant | Yes, Profile S |
| Web Browser | IE 8.0 or newer |
| General | |
| Power Source | PoE Class 3 (IEEE802.3af) |
| Power Consumption | 11.76 W (PoE) |
| Weight | 620g (1.367lb) |
| Dimensions | (Ø x H): 146.00mm x 105.10mm (5.7" x 4.1") |
| Mount Type | Surface, Gang Box, Flush, Pendant, Converter for NPT Standard Mounts, Wall Mount, Pole Mount, Corner Mount |
| Starting Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Humidity | 10% - 85% RH, non-condensing |
| Approvals | CE, FCC, UL (for optional PoE injector) |
| Real-time Clock (RTC) | No |
| Warranty | 3 Year(s). For extended warranty offering, see http://www.acti.com/support/warranty |