ACTi - TCM-3111 - 1.3MP Indoor Fixed Dome IP Camera with 4.2mm Lens
Product Overview
The ACTi TCM-3111 is a 1.3MP indoor fixed dome camera with a 4.2mm lens. It uses a progressive scan CMOS image sensor and is intended for standard indoor surveillance where compact dome coverage is required.
Key Configuration
Product type: Fixed Dome; application environment: Indoor; maximum resolution: 1.3MP; image sensor: Progressive Scan CMOS; sensor size: 1/3"; lens: f4.2mm; day/night: No; low light sensitivity: Standard; S/N ratio: 44 dB.
Key Features
• 1.3MP indoor fixed dome camera
• 4.2mm fixed lens for predefined scene coverage
• Progressive scan CMOS image sensor
• Standard low-light sensitivity for indoor monitoring
• DSP-based configurable color to B/W switching
Technical Context
The camera specifies minimum illumination of 0.5 lux at F1.0 in both color and B/W modes at 30 IRE and 2400 K. It does not include a mechanical IR cut filter, and its electronic shutter ranges from 1/30-1/1000 second in manual mode and 1/5-1/15000 second in auto mode.
Installation Notes
The indoor fixed dome housing is suited for installations where the camera position and viewing area are established during setup. Its fixed 4.2mm lens is best used for stable monitoring zones that do not require lens zoom adjustment.
| Product Profile | |
| Product Type | Fixed Dome |
| Application Environment | Indoor |
| Maximum Resolution | 1.3MP |
| Image Sensor | Progressive Scan CMOS |
| Sensor Size | 1/3 " |
| Day / Night | No |
| Low Light Sensitivity | Standard |
| Minimum Illumination | Color: 0.5 lux at F1.0 (30 IRE , 2400 K); B/W: 0.5 lux at F1.0 (30 IRE, 2400 K) |
| Mechanical IR Cut Filter | No |
| Color to B/W Switch | DSP based switch, configurable |
| Electronic Shutter | 1/30-1/1000 second (manual mode); 1/5-1/15000 second (auto mode) |
| S/N Ratio | 44 dB |
| Lens | |
| Focal Length | Fixed focal, f4.2mm |
| Aperture | F1.8 |
| Iris | Fixed iris |
| Focus | Fixed focus |
| Lens Mount | Board mount |
| Horizontal Viewing Angle | 68.2° |
| Viewing Angle Adjustment | Pan: 0°-170°, Tilt: 0°-180° |
| Video | |
| Compression | H.264 (Baseline/ Main/ High profile), MPEG-4, MJPEG |
| Maximum Frame Rate vs. Resolution | 18 fps at 1280 x 1024 26 fps at 1280 x 720 30 fps at 640 x 480 |
| Bit Rate | 28Kbps - 6Mbps |
| Bit Rate Mode | Constant, Variable |
| Multi-Streaming | Simultaneous dual streams based on two configurations |
| Digital Noise Reduction | No |
| Image Orientation | Flip, Mirror |
| Image Enhancement | White Balance, Brightness, Saturation, Contrast, Sharpness, Automatic exposure, Flickerless |
| Privacy Mask | 4 configurable regions |
| Text Overlay | Yes |
| Server-based Analytics | Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy) |
| Network | |
| Network Protocol & Service | IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, SMTP, FTP, IGMP, ICMP, ARP, UPnP, ToS, SNMP, IEEE 802.1X |
| Ethernet Port | 1, Ethernet (10/100 Base-T), RJ-45 connector |
| Security | IP address filtering, HTTPS encryption, Password protected user level, IEEE 802.1X network access control |
| Event | |
| Event Trigger | Video motion detection (3 regions), |
| Event Response | Notify control center, Change camera settings, Command other devices, E-mail notification with snapshots, Upload video or snapshot to FTP server, Activate external device through digital output |
| Integration | |
| Unified Solution | Fully compatible with ACTi software |
| Software Development Kit | Yes |
| ONVIF Compliant | Yes |
| Web Browser | IE 8.0 or newer |
| General | |
| Power Source | PoE Class 2 (IEEE802.3af) |
| Power Consumption | 4.368 W (PoE) |
| Weight | 270g (0.6lb) |
| Dimensions | (Ø x H): 130mm x 99mm (5.12" x 3.90") |
| Mount Type | Surface, Gang Box, Flush, Pendant, Converter for NPT Standard Mounts, Wall Mount, Pole Mount, Corner Mount |
| Starting Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Humidity | 10% - 85% RH, non-condensing |
| Approvals | CE, FCC, UL (for optional PoE injector) |
| Warranty | 3 Year(s). For extended warranty offering |
