ACTi - TCM-5111 - 1.3MP Indoor/Outdoor Fixed Box IP Camera
Product Overview
The ACTi TCM-5111 is a 1.3MP fixed box camera with a fixed f4.2mm lens. It is designed for indoor and outdoor surveillance applications and includes weatherproof IP66 protection.
Key Configuration
Product type: Fixed Box; application environment: Indoor/Outdoor; maximum resolution: 1.3MP; image sensor: Progressive Scan CMOS; sensor size: 1/3"; lens: f4.2mm fixed; day/night: Yes; weatherproof rating: IP66.
Key Features
• 1.3MP fixed box camera
• Fixed f4.2mm lens
• Day/night operation with mechanical IR cut filter
• Weatherproof IP66 protection
• CDS sensor based color to B/W switching
Technical Context
The camera is specified with minimum illumination of color: 0.5 lux at F1.0 and B/W: 0.05 lux at F1.0, both at 30 IRE and 2400 K. It supports an IR sensitivity range of 700-1100nm, electronic shutter control from 1/30-1/1000 second in manual mode and 1/15-1/15000 second in auto mode, and a 44 dB S/N ratio.
Installation Notes
The fixed box form factor and IP66 protection make the camera suitable for indoor or outdoor installations where a fixed viewing direction and protected housing are required.
| Product Profile | |
| Product Type | Fixed Box |
| Application Environment | Indoor/Outdoor |
| Maximum Resolution | 1.3MP |
| Image Sensor | Progressive Scan CMOS |
| Sensor Size | 1/3 " |
| Day / Night | Yes |
| Low Light Sensitivity | Standard |
| Minimum Illumination | Color: 0.5 lux at F1.0 (30 IRE , 2400 K); B/W: 0.05 lux at F1.0 (30 IRE, 2400 K) |
| Mechanical IR Cut Filter | Yes |
| IR Sensitivity Range | 700-1100nm |
| Color to B/W Switch | CDS sensor based switch |
| Electronic Shutter | 1/30-1/1000 second (manual mode, 60 Hz), 1/15-1/15000 second (auto mode) |
| S/N Ratio | 44 dB |
| Lens | |
| Focal Length | Fixed focal, f4.2mm |
| Aperture | F1.8 |
| Iris | Fixed iris |
| Focus | Manual focus |
| Lens Mount | CS Mount (interchangeable lens) |
| Horizontal Viewing Angle | 64.4° |
| Video | |
| Compression | H.264 (Baseline), MPEG-4, MJPEG |
| Maximum Frame Rate vs. Resolution | 18 fps at 1280 x 1024 26 fps at 1280 x 720 30 fps at 640 x 480 |
| Bit Rate | 28Kbps - 6Mbps |
| Bit Rate Mode | Constant, Variable |
| Multi-Streaming | Simultaneous dual streams based on two configurations |
| Digital Noise Reduction | No |
| Image Orientation | Flip, Mirror |
| Image Enhancement | White Balance, Brightness, Saturation, Contrast, Sharpness, Automatic gain control (AGC), Automatic exposure, Flickerless |
| Privacy Mask | 4 configurable regions |
| Text Overlay | Yes |
| Server-based Analytics | Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy) |
| Network | |
| Network Protocol & Service | IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, SMTP, FTP, IGMP, ICMP, ARP, UPnP, ToS, SNMP, IEEE 802.1X |
| Ethernet Port | 1, Ethernet (10/100 Base-T), RJ-45 connector |
| Security | IP address filtering, HTTPS encryption, Password protected user level, IEEE 802.1X network access control |
| Event | |
| Event Trigger | Video motion detection (3 regions), |
| Event Response | Notify control center, Change camera settings, Command other devices, E-mail notification with snapshots, Upload video or snapshot to FTP server, Activate external device through digital output |
| Integration | |
| Unified Solution | Fully compatible with ACTi software |
| Software Development Kit | Yes |
| ONVIF Compliant | Yes |
| Web Browser | IE 8.0 or newer |
| General | |
| Power Source | PoE Class 2 (IEEE802.3af) |
| Power Consumption | 4.51 W (PoE) |
| Weight | 400g (0.88lb) |
| Dimensions | (W x H x D): 67mm x 55mm x 129.5mm (2.64" x 2.17" x 5.10") |
| Environmental Casing | Optional housing (IP66) |
| Mount Type | Bracket, Pole Mount, Corner Mount |
| Starting Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Humidity | 10% - 85% RH, non-condensing |
| Approvals | CE, FCC, UL (for optional PoE injector) |
| Warranty | 3 Year(s). For extended warranty offering |
