ACTi - TCM-5611 - 1.3MP Indoor/Outdoor Fixed Box IP Camera with Basic WDR
Product Overview
The ACTi TCM-5611 is a 1.3MP fixed box network camera with Basic WDR and a fixed f4.2mm lens. It is built for indoor or outdoor surveillance applications and includes IP66 weatherproof protection.
Key Configuration
Product type: Fixed Box; application environment: indoor/outdoor; maximum resolution: 1.3MP; image sensor: Progressive Scan CMOS; sensor size: 1/3"; lens: f4.2mm; day/night: yes; weatherproof rating: IP66.
Key Features
• 1.3MP fixed box camera format
• Basic WDR support for improved contrast handling
• Fixed f4.2mm lens
• Mechanical IR cut filter for day/night operation
• IP66 weatherproof protection for outdoor use
Technical Context
The camera uses a 1/3" progressive scan CMOS sensor and supports day/night operation with a mechanical IR cut filter. Minimum illumination is specified as color 0.5 lux at F1.0 and B/W 0.05 lux at F1.0, with an IR sensitivity range of 700-1100nm.
Installation Notes
The indoor/outdoor fixed box design is suitable for installations where a weatherproof IP66 camera body is required. The CDS sensor-based color-to-B/W switch is configurable, and the electronic shutter supports 1/30-1/1000 second in manual mode and 1/15-1/15000 second in automatic mode.
| Product Profile | |
| Product Type | Fixed Box |
| Application Environment | Indoor/Outdoor |
| Maximum Resolution | 1.3MP |
| Image Sensor | Progressive Scan CMOS |
| Sensor Size | 1/3 " |
| Day / Night | Yes |
| Low Light Sensitivity | Standard |
| Minimum Illumination | Color: 0.5 lux at F1.0 (30 IRE , 2400 K); B/W: 0.05 lux at F1.0 (30 IRE, 2400 K) |
| Mechanical IR Cut Filter | Yes |
| IR Sensitivity Range | 700-1100nm |
| Color to B/W Switch | CDS sensor based switch, configurable |
| Electronic Shutter | 1/30-1/1000 second (manual mode, 60 Hz), 1/15-1/15000 second (auto mode) |
| S/N Ratio | 44 dB |
| Lens | |
| Focal Length | Fixed focal, f4.2mm |
| Aperture | F1.8 |
| Iris | Fixed iris |
| Focus | Manual focus |
| Lens Mount | CS Mount (interchangeable lens) |
| Horizontal Viewing Angle | 64.4° |
| Video | |
| Compression | H.264 (Baseline/ Main/ High profile), MPEG-4, MJPEG |
| Maximum Frame Rate vs. Resolution | 18 fps at 1280 x 1024 26 fps at 1280 x 720 30 fps at 640 x 480 |
| Bit Rate | 28Kbps - 6Mbps |
| Bit Rate Mode | Constant, Variable |
| Multi-Streaming | Simultaneous dual streams based on two configurations |
| Digital Noise Reduction | No |
| Wide Dynamic Range | Basic WDR |
| Image Orientation | Flip, Mirror |
| Image Enhancement | White Balance, Brightness, Contrast, Saturation, Sharpness, Flickerless, Automatic gain control (AGC), Automatic exposure |
| Privacy Mask | 4 configurable regions |
| Text Overlay | Yes |
| Server-based Analytics | Face Detection, Object Based Motion Detection, Tamper, People Counting, Object Line Crossing Detection, Object Enter Area Detection, Exit Area, Appear in Area, Missing Object Detection, Crowd Detection, Direction Detection, Vehicle Counting, Heat Map, Automatic License Plate Recognition, Vehicle Speed Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy) |
| Audio | |
| Audio Type | 2-way, Line-in, Line-out |
| Audio Compression | 8 kHz, Mono, PCM, 16 bit encoding |
| Network | |
| Network Protocol & Service | TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4/v6, ARP, ICMP, IGMP, SMTP, UPnP, SNMP, FTP, Bonjour, DDNS, DNS, NTP |
| Ethernet Port | 1, Ethernet (10/100 Base-T), RJ-45 connector |
| Security | IP address filtering, HTTPS encryption, Password protected user level, IEEE 802.1X network access control |
| Event | |
| Event Trigger | Video motion detection (3 regions), External device through digital input, |
| Event Response | Notify control center, Change camera settings, Command other devices, E-mail notification with snapshots, Upload video or snapshot to FTP server, Activate external device through digital output |
| Integration | |
| Unified Solution | Fully compatible with ACTi software |
| Software Development Kit | Yes |
| ONVIF Compliant | Yes |
| Web Browser | IE 8.0 or newer |
| Interface | |
| Audio Interface | 3.5mm Phone Jack |
| Auto Iris Connector | External connector for DC iris lens |
| Digital Input/Output | 1/1 |
| General | |
| Power Source | DC 12V, PoE Class 3 (IEEE802.3af) |
| Power Consumption | 6.24 W (PoE), 5.16 W (DC) |
| Weight | 400g (0.88lb) |
| Dimensions | (W x H x D): 67mm x 55mm x 129.5mm (2.64" x 2.17" x 5.10") |
| Environmental Casing | Optional housing (IP66) |
| Mount Type | Bracket, Pole Mount, Corner Mount |
| Starting Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Temperature | -10°C ~ 50°C (14°F ~ 122°F) |
| Operating Humidity | 10% - 85% RH, non-condensing |
| Approvals | CE, FCC, UL (for optional PoE injector and power adapter) |
| Real-time Clock (RTC) | Yes |
| Warranty | 3 Year(s). For extended warranty offering |
