Uniview - NSW2010-6T-PoE-IN - Ethernet 4 Port PoE Switch
Product Overview
Uniview NSW2010-6T-PoE-IN is a 4-port 100Mbps PoE switch with 6 total network ports. It delivers a switching capacity of 1.2 Gbps and forwarding performance of 0.90 Mpps. The switch provides 65W total PoE budget with up to 30W per port, supporting IEEE 802.3at/af PoE standards.
Key Configuration
- • 6 × 100 Mbps network ports (RJ45), including 4 PoE ports
- • Switch capacity: 1.2 Gbps; forwarding rate: 0.90 Mpps
- • Total PoE power: 65W; per-port maximum: 30W
- • MAC address table: 2K; packet buffer: 768 Kbit
- • Switch power: 67W; power supply: 100-240V AC, 50/60Hz
Key Features
• Three operating modes: Normal (all ports communicate), Secure (downlink ports communicate only with uplink ports), EXTEND (Surveillance mode with 250m transmission distance, downlink to uplink only)
• Port traffic control and buffer optimization
• All-metal housing
• Surge protection: common mode ±6KV, differential mode ±4KV
• Electrostatic standard: common mode ±6KV, differential mode ±8KV
• Mean Time Between Failure (MTBF): >50,000 hours; no cooling fans
Technical Context
Standards supported: IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at. LED indicators: PWR (AC input status), PoE (PoE supply status), LINK/ACT (link and activity at 10/100Mbps), Speed (10/100Mbps vs 1000Mbps – note this switch is 100Mbps).
Installation Notes
Dimensions: 160 × 93 × 32 mm (6.3" × 3.7" × 1.3"); weight: <0.6 kg. Metal housing. Operating temperature: 0°C to 45°C (32°F to 113°F); humidity: 10% to 90% non-condensing. Storage humidity: 5% to 90% non-condensing. No cooling fans.
| Model | NSW2010-6T-PoE-IN |
| Ports | 6×100Mbps network ports (RJ45), including 4 PoE po |
| Standards | IEEE802.3,IEEE802.3u,IEEE802.3az,IEEE802.3x,IEEE802.3af,IEEE802.3at |
| Switching capacity | 1.2Gbps |
| Forwarding performance | 0.90Mpps |
| Packet Buffer | 768Kbit |
| MAC | 2K |
| Dimensions (W×D×H) | 160mm x 93mm x 32mm(6.3"×3.7"×1.3") |
| Weight | <0.6kg |
| Power supply | AC: 100-240V, 50/60Hz |
| PoE | 802.3at/af |
| Max. PoE Power | Max capacity: 65W Max capacity for single port: 30W |
| Switch Power | 67W |
| Surge Protection | Common mode ±6KV Differential mode ±4KV |
| Electrostatic standard | Common mode ±6KV Differential mode ±8KV |
| Cooling Fans | 0 |
| Mean Time Between Failure(MTBF) | >50000 hours |
| Ambient temperature | 0°C-45°C (32°F-113°F) |
| Operating humidity | 10%～90% (noncondensing) |
| Storage humidity | 5%～90% (noncondensing) |
Indicator | PWR: Steady on: AC input is normal Off: No AC input |
PoE: Off: No PoE power supply Steady on: PoE power supply is normal Flashing: PoE power supply is abnormal | |
LINK/ACT: Off: No link Steady: Linked at 10/100Mbps Flashing: Transmitting data | |
Speed: Off: Linked at 10/100Mbps On: Linked at 1000Mbps | |
| Working Mode | Default(Normal mode) : All ports can communicate with each other. EXTEND(Surveillance mode): Transmission distance up to 250 meters,also downlink ports can communicate only with uplink ports. |
