The DS1 is designed for use on egress doors (with no card reader) equipped with magnetic locks or strikes, a request to exit device such as a PIR or electric panic bar, and a door contact switch. After an RTE (request to exit) is received, the door contact shunt time (prop time) begins. If the door is left open, after the timer times out, an alarm will result. If the door closes before the timer time ends (prop time), the timer is automatically reset and the contact is re-armed.

Includes:

• DS1 Door shunt timer board
• Installation instructions

Features:

• LED alarm indicator
• N.C. dry contact alarm input, output and RTE.
• Momentary or maintained RTE signal.
• Jumper settable for auto-reset timer (when door closes) or time-out after RTE ends.
• Prop timer is re-triggerable while door is open.
• Adjustable prop timer 1 to 20 seconds or 1 to 20 minutes.
• Jumper setting for minutes or seconds selection
• Power input polarity protected.
• Easy cable run terminations.
• Power: 12 to 24VDC@ 50mA.
• Blue power indicator.
• Dimensions: W 2.14 x L1.5