ETS - SM5-EQ - 1 SM1 Microphone, SMEQ-1 Seven band audio equalizer / DVR interface Box Kit
Part number:
Price:

Single zone audio surveillance system for use with DVRs and I/P cameras. Provides +/-12db sound emphasis or de-emphasis in 7 ranges of frequencies (60hz-15khz) for acoustically difficult environments. The user can lower unwanted background noise and emphasize the desired target sound source. The included SM1-P high performance, ultra low noise, stainless steel/tamper resistant microphone has an adjustable automatic gain control circuit designed to lower the microphone volume when sound levels change. The combination of features in the SM5-EQ-PSSE kit make it ideal for police booking and interrogation rooms.

 

Includes

1ea. SM1-PSSE Microphone.

Microphone mounting screws.

SMEQ-1 Equalizer / interface

12 VDC AC adapter.

1 each 6’ RCA or 3.5mm patch

cable.

1ea. Warning label

Installation instructions.

 

Options

SPECIFY: RCA OR 3.5mm

input / output connectors.

 

Wiring Requirements

Microphone cable run: Stranded

22-gauge, 2-conductor shielded cable.

Distances up to 1500 feet.

 

SM1-PSSE Specifications

Omni-directional 25’ pickup pattern.

Ultra low noise and (-80db)

High sensitivity (-28db)

Low noise MOSFET pre-amplifier

500Hz-16Khz Frequency response

(hi-cut and lo-cut off)

Adjustable lo-cut filter: (500hz to 1Khz)

Adjustable hi-cut filter: (5Khz to16Kz)

Adjustable automatic gain control.

(compression range adjustable from 1:1 to 10:1).

Adjustable output level (post AGC).

100 Ohm unbalanced output.

S/N ratio: more than 60DB

Sensitivity –45DB, S/N ratio: 60DB

Dimensions: L 4.7” x W 2.9” H 0.9”

Stainless steel, tamper resistant plate mounts flush

or on a single gang electrical box

 

SMEQ-1 Specifications

Includes RCA (or specify 3.5mm) patch cable and

12Vdc AC adaptor.

7 frequency band controls: 60hz, 150hz, 400hz,

1Khz, 2.5Khz, 6Khz, 15Khz.

+/- 12db gain / cut for each frequency band.

Line level RCA input / output jacks and 3 terminal

connectors for connections to ETS microphones and

base stations.

Output level control.

Reverse polarity protected and fused.

Power consumption 12vdc@35ma with microphone.

Dimensions: L 5.3 x W 3.3 x H 1.6

Name
Description
Size
Downloads
File
Instruction
0mb
File
Specification
0mb