ETS - SS8-RC - 8 Channel Remote Controlled Speaker Selector / Driver
- • 70v line driver for each speaker. 3 Watts max. per speaker. Can be used with any 70V speaker or ETS speakers.
- • Level controls for each speaker
- • Local speaker switching mode for troubleshooting problems in the field
- • Easy cable run termination
- • Power: 16VAC @ 3A
- • Includes: SS8 Switcher / Speaker Driver, 16 VAC AC adapter, 3’ RCA Patch cable, DB9 to 3.5mm RS232 patch cord
RM1 Rack mount
• Stranded 22-gauge, 2-conductor
| Amplifier Type | 70V line driver for each speaker |
| Maximum Power per Speaker | 3 Watts |
| Compatible Speakers | Can be used with any 70V speaker or ETS speakers |
| Speaker Level Controls | Level controls for each speaker |
| Local Speaker Switching | Mode for troubleshooting problems in the field |
| Cable Termination | Easy cable run termination |
| Power Requirement | 16VAC @ 3A |
| Serial Port | RS232 at 2400 Baud 8N1 |
| Dimensions (W x L x H) | 2.75" x 4.38" x 1.56" |
RS232-controllable microphone switcher/mixer for use with remote, monitored audio surveillance systems. The SM8-RC connects to video/audio transmission equipment with an available RS232 port that uses telephone, internet or LAN media. The SM8-RC is useful when the transmission equipment lacks sufficient microphone audio inputs and switching/mixing capabilities. The remote equipment manufacturer must program the SM8-RC to control it via RS232. It powers up to eight SM1 pre-amplified microphones and outputs a line-level audio signal. It can be expanded to support up to 32 microphone zones by looping connections from an SM8-RC to a further three SM8-RCs. The SM8-RCs are controlled via RS232 using simple ASCII commands. See www.etsnm.com for a complete listing of the commands.