GeoVision - 84-DFR1352-0200 - GV-DFR1352 13.56MHZ DOOR FRAME CARD READER, IP66, UL CERTIFICATION

Part number:
520-DFR1352-000
Price:

The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing access control cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use.

 

Features:

  • Weather-proof and IP66-compliant housing (for outdoor use)
  • Wiegand interface for third-party integration
  • RS-485 interface for longer distance installation
  • 13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)
  • GeoVision access cards with GID (GeoVision Identifier) to enhance security
  • UL 294 compliance

 

Note:

  • RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
  • GID is only supported by GV-DFR1352 (Rev. B) firmware V1.2 or later.
  • UL 294 Attack Class Level 1 depends on other connected equipment.
  • If you are using third-party cards or key fobs, the reader must be under UID mode.
  • Specifications are subject to change without notice.
CPU8‐bit microprocessor
Frequency13.56 MHz for ISO14443A (Mifare DESFire, Mifare Plus and Mifare Classic)
Input Rating7.5V DC ~ 12V DC, 200mA
Wiegand InterfaceWiegand 26 / 34 bit, distance 100 m (328.1ft), 24 AWG, 13V DC min., 85 °C min
RS‐4859,600 bps, distance 600 m (1968.50 ft), 24 AWG, 13V DC min., 85 °C min
LEDRed, Green and Blue LED
BeeperBuzzer
ColorBlack 
Supported ID FormatsGID and UID
Operating Temperature ‐35 °C ~ 66°C / ‐31 °F ~ 150.8 °F
Operating Humidity10 ~ 90% RH (non‐condensing)
Dimensions (W x H x D)20.9 x 105.6 x 20.5mm (0.8 x 4.2 x 0.8 in)
Weight80 g (0.17 lb)
Ingress ProtectionIP66
CertificationCE, FCC, RoHS, UL 294, CUL
Name
Description
Size
Downloads
File
Datasheet
0.2mb
File
Version History
0.1mb
File
Controller History
0.3mb