- Layer 2 Features
- Prevents packet loss Flow Control:
- IEEE 3x PAUSE frame Flow Control for Full-Duplex mode
- Back-Pressure Flow Control in Half-Duplex mode
- High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- 8K MAC Address Table, automatic source address learning and ageing
- Support VLAN:
- IEEE 1Q Tag-Based VLAN
- Port-Based VLAN
- Q-in-Q tunneling (Double Tag VLAN)
- GVRP for dynamic VLAN Management
- Private VLAN Edge (PVE / Protect Port )
- Prevents packet loss Flow Control:
- Supports Link Aggregation
- Up to 13 Trunk groups
- Up to 8 ports per trunk group with 6Gbps bandwidth (Full Duplex mode)
- IEEE 3ad LACP (Link Aggregation Control Protocol)
- Cisco ether-Channel (Static Trunk)
- Support Spanning Tree Protocol:
- STP, IEEE 1D (Classic Spanning Tree Protocol)
- MSTP, IEEE 1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
- Quality of Service
- 4 priority queues on all switch ports
- Traffic classification:
- IEEE 1p Class of Service
- IP TOS / DSCP code priority
- Port Base priority
- Strict priority and weighted round robin (WRR) CoS policies
- Ingress/Egress Bandwidth control on each port
- Multicast
- IGMP Snooping v1 and v2
- IGMP Snooping v2 fast leave
- IGMP Query mode for Multicast Media application
- Security
- IEEE 1x Port-Based network access control protocol
- RADIUS users access authentication
- L3 / L4 Access Control List (ACL)
- Source IP-MAC / Port-Binding
- Port Security for Source MAC address entries filtering
- Management
- Switch Management Interface
- Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, v3 switch management
- SSL switch management
- DHCP client for IP address assignment
- DHCP Option82 and DHCP Relay
- Link Layer Discovery Protocol (LLDP) for easy network management
- Built-in Trivial File Transfer Protocol (TFTP) client
- Firmware upgrade via TFTP or HTTP
- Configuration restore / backup via TFTP or HTTP
- Event message logging to remote Syslog server
- Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down notification
- Supports Ping function
Product |
FGSD-1022 |
FGSD-1022P |
FGSD-1022HP |
| Hardware Specification | |||
10/100Mbps Copper Ports | 8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports | 8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports | 8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
| 1000Mbps Copper Ports | 2 10/100/1000Base-T RJ-45 port | ||
| SFP/mini-GBIC Slots | 2 SFP interfaces, shared with Port-9 and Port-10 | ||
| Switch Architecture | Store-and-Forward | ||
| Switch Fabric | 5.6Gbps / non-blocking | ||
| Switch Throughput | 4.16Mpps@64Bytes | ||
| Address Table | 8K entries | ||
| Share Data Buffer | 2Mbits | ||
| Flash | 4Mbytes | ||
| DRAM | 32Mbytes | ||
| Maximum Frame Size | 9K Bytes | ||
Flow Control | Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex | ||
LED | Power (Green) Link/Activity (Green) 10/100 LNK / ACT(Orange) 1000 LNK / ACT(Green) 10/100 LNK / ACT(Orange) | Power (Green) Link/Activity (Green) PoE In-Use (Orange) 1000 LNK / ACT(Green) 10/100 LNK / ACT(Orange) | |
Dimensions ( W x D x H) | 330 x 155 x 44 mm, 1U height | 330 x 155 x 44 mm, 1U height | |
| Weight | 1.2kg | 1.6kg | 1.74kg |
| Power Requirement | 100~240V AC, 50-60 Hz | ||
| Power Consumption | 16 Watts (Full load) | 140 Watts (Full PoE Load) | 170 Watts (Full PoE Load) |
| Operating Temperature | Standard: 0 ~ 50 Degree C | ||
| Operating Humidity | 20% to 95% (Non-condensing) | ||
| Storage Temperature | -10 Degree C ~ 70 Degree C | ||
| Layer 2 Functions | |||
| Management Interface | Console, Telnet, Web Browser, SSL, SNMP v1, v2c, v3 | ||
Port Configuration | Port disable/enable. Auto-negotiation 10/100Mbps full and half duplex mode selection. Flow Control disable / enable. Bandwidth control and broadcast storm filter on each port. | ||