Features:
FGSW-2620VM
- 24-Port 10/100Base-TX RJ-45 interfaces
- 2-Port Gigabit TP/SFP combo interfaces
- Reset button for system management
FGSW-2620PVM
- 24-Port 10/100Base-TX RJ-45 with PoE Injector
- 2-Port Gigabit TP/SFP combo interfaces
- Reset button for system management
- 1 RS-232 male DB9 console interface for Switch basic management and setup
- Layer 2 Features
- Complies with the IEEE 3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
- Supports Auto-negotiation and Half-Duplex / Full-Duplex modes for all 10Base-T / 100Base-TX and Full-Duplex mode for 1000Base-T
- Auto-MDI/MDI-X detection on each RJ-45 port
- Prevents packet loss Flow Control:
- IEEE 3x PAUSE frame Flow Control for Full-Duplex mode
- Back-Pressure Flow Control in Half-Duplex mode
- High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- 8K MAC Address Table, automatic source address learning and ageing
- Support VLANs:
- IEEE 1Q Tag-Based VLAN
- Up to 255 VLANs groups, out of 4096 VLAN IDs
- Port-Based VLAN
- Q-in-Q tunneling (Double Tag VLAN)
- Supports Link Aggregation
- Up to 13 Trunk groups
- Up to 8 ports per trunk group with 6Gbps bandwidth (Full Duplex mode)
- IEEE 3ad LACP (Link Aggregation Control Protocol)
- Cisco ether-Channel (Static Trunk)
- Support Spanning Tree Protocol:
- STP, IEEE 1D (Classic Spanning Tree Protocol)
- RSTP, IEEE 1w (Rapid Spanning Tree Protocol)
- Quality of Service
- 4 priority queues on all switch ports
- Traffic classification:
- IEEE 1p Class of Service
- IP TOS / DSCP code priority
- Port Base priority
- Strict priority and weighted round robin (WRR) CoS policies
- Ingress/Egress Bandwidth control on each port
- Multicast
- IGMP Snooping v1 and v2
- IGMP Query mode for Multicast Media application
- 256 multicast groups
- Security
- Layer 2 / 3 / 4 Access Control List (ACL)
- IEEE 1x Port-Based Authentication
- MAC address Filtering and MAC address Binding
- IP address security management to prevent unauthorized intruder
- Port Mirroring to monitor the incoming or outgoing traffic on a particular port
- Management
- Switch Management Interface
- Web switch management
- Telnet Command Line Interface
- SNMP v1, v2c switch management
- Console local management ( FGSW-2620PVM only)
- SNMP Trap for alarm notification of events
- Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
- Built-in Trivial File Transfer Protocol (TFTP) client
- Firmware upload / download via TFTP or HTTP
- Configuration upload / download via TFTP or HTTP
- Supports Ping function
- Switch Management Interface
- Power over Ethernet (FGSW-2620PVM Only )
- Complies with IEEE 3af Power over Ethernet End-Span PSE
- Up to 24 IEEE 3af devices powered
- Support PoE Power up to 4 watts for each PoE ports
- Auto detect powered device (PD)
- Circuit protection prevent power interference between ports
- Remote power feeding up to 100m
- PoE Management
- Total PoE power budget control
- Pert port PoE function enable/disable
- PoE Port Power feeding priority
- Per PoE port power limit
- PD classification detection
|
Product |
FGSW-2620VM |
FGSW-2620PVM |
|
Hardware Specification |
||
|
Hardware Version |
Version 2 |
Version 1 |
|
10/100Mbps Copper Ports |
24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
|
|
1000Mbps Copper Ports |
2 10/100/1000Base-T RJ-45 port |
|
|
SFP/mini-GBIC Slots |
2 SFP interfaces, shared with Port-25 and Port-26 |
|
|
Switch Architecture |
Store-and-Forward |
|
|
Switch Fabric |
8.8Gbps / non-blocking |
|
|
Switch Throughput |
6.547Mpps@64Bytes |
|
|
Address Table |
8K entries |
|
|
Share Data Buffer |
512Kbytes |
|
|
Flash |
4Mbytess |
|
|
DRAM |
16Mbytes |
32Mbytes |
|
Maximum Frame Size |
9K Bytes |
|
|
Flow Control |
Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex |
|
|
LED |
Power Link/Activity (Green) 1000 LNK / ACT(Green) 10/100 LNK / ACT(Green) |
Power, FAN Alarm Link/Activity (Green) PoE In-Use (Amber) 1000 LNK / ACT(Green) 10/100 LNK / ACT(Green) |
|
Dimensions ( W x D x H) |
440 x 120 x 44 mm, 1U height |
440 x 200 x 44 mm, 1U height |
|
Weight |
1.87kg |
2.6kg |
|
Power Requirement |
100~240V AC, 50-60 Hz |
|
|
Power Consumption |
25 Watts (Full load) |
210 Watts (Full PoE Load) |
|
Operating Temperature |
Standard: 0 ~ 50 Degree C |
|
|
Operating Humidity |
10% to 90% (Non-condensing) |
|
|
Storage Temperature |
-40 Degree C ~ 85 Degree C |
|
|
Layer 2 Functions |
||
|
Management Interface |
Telnet, Web Browser, SNMP v1, v2c |
Console, Telnet, Web Browser, SNMP v1, v2c and v3 |
|
Port Configuration |
Port disable/enable. Auto-negotiation 10/100Mbps full and half duplex mode selection. Flow Control disable / enable. |
|
|
Bandwidth control and broadcast storm filter on each port. |
||
|
Port Status |
Display each port’s speed duplex mode, link status, Flow control status. Auto negotiation status |
|
|
VLAN |
Port-Based VLAN, up to 9 VLAN groups IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN groups |
|
|
Spanning Tree |
IEEE 802.1d Spanning Tree IEEE 802.1w Rapid Spanning Tree |
|
|
Link Aggregation |
Static Port Trunk IEEE 802.3ad LACP (Link Aggregation Control Protocol) Supports 13 groups of 8-Port trunk support |
|
|
Quality of Service |
Traffic classification based on : · Port-Based priority · 802.1p priority, · IP DSCP/TOS field in IP Packet |
|
|
IGMP Snooping |
v1 and v2 256 multicast groups and IGMP query |
|
|
Bandwidth Control |
Per port Ingress / Egress bandwidth control in steps of128Kbps |
|
|
Port Mirror |
RX/TX/Both |
|
|
Security |
802.1x Port-Based Network access control MAC Limit Static MAC MAC Filtering |
|
|
Access Control List |
Supports up to 220 rule entries |
|
|
SNMP MIBs |
RFC-1157 SNMP MIB RFC-1213 MIB-II RFC-1215 Trap RFC-2863 Interface MIB RFC-1493 Bridge MIB RFC-2674 Extended Bridge MIB (Q-Bridge) RFC-1643 |
|
|
Power over Ethernet |
||
|
PoE Standard |
- |
IEEE 802.3af Power over Ethernet / PSE |
|
PoE Power Supply Type |
- |
End-Span |
|
PoE Power output |
- |
Per Port 48V DC, 350mA . Max. 15.4 watts |
|
Power Pin Assignment |
- |
1/2(+), 3/6(-) |
|
PoE Power Budget |
- |
190 Watts |
|
Max. number of Class2 PD |
24 |
|
|
Max. number of Class 3 PD |
- |
12 |