PLANET POE Managed PoE Injector Hub series, a cost-effective and quick PoE solution, is designed to perfectly upgrade an existing network infrastructure to IEEE 802.3at Power over Ethernet Plus network system without replacing the existing Ethernet Switch.
Features:
Interface
- 48-port RJ45
- 24-port 10/100/1000Mbps “Data input”
- 24-port 10/100/1000Mbps “Data + Power output”
- One 10/100/1000BASE-T management port
Power over Ethernet
- Complies with IEEE 3at Power over Ethernet Plus mid- span PSE
- Up to 24 IEEE 3at/802.3af devices powered
- 440-watt PoE budget
- Supports PoE power up to 8 watts (802.3at PoE+)/15.4 watts (802.3af PoE) for each PoE port
- Automatically detects PD
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
PoE Management
- Total PoE power budget control
- Per port PoE power schedule
- PoE function enable/disable
- Per port PoE function enable/disable
- PoE port power feeding priority
- PD classification detection
- Over temperature protection
- PD alive check
Management
- Web interface for remote management
- Supports Network Time Protocol (NTP)
- Firmware upgrade through Web interface
- PLANET Smart Discovery utility automatically finds PLANET
devices on the network
- SNMP trap for alarm notification of events
- System log/remote syslog
Hardware
- 19-inch rack mountable; 1U height
- Reset button for resetting to default setting and system reboot
- LED indicators for PoE ready and PoE activity
- LED indicators for power alert and fan alert
|
Product |
POE-2400G |
|
|
Hardware |
||
|
Hardware Version |
5 |
|
|
Interface |
“Data” Input Ports |
24 x RJ45 |
|
“Data+Power” Output Ports |
24 x RJ45 |
|
|
Management Port |
1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX |
|
|
Data Rate |
10/100/1000Mbps |
|
|
LED |
System: SYS PWR x 1 (Green) PoE Failure x 1 (Red) Fan1 Failure x 1 (Red) Fan2 Failure x 1 (Red) Per PoE Port: PoE-in-use x 1 (Green) Management port x 2: 1000 (Green), 10/100 (Orange) |
|
|
Network Cable |
10BASE-T: 4-pair UTP Cat5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat5e/6 up to 100m (328ft) EIA/TIA- 568 100-ohm STP (100m) |
|
|
Power Requirements |
100-240V AC, 50/60 Hz, 8A |
|
|
Power Consumption |
500 watts (max.) |
|
|
Ventilation |
Fan x 2 |
|
|
Dimensions (W x D x H) |
440 x 300 x 44mm |
|
|
Power over Ethernet |
||
|
PoE Power Supply Type |
Mid-span |
|
|
PoE Power Output |
Per port DC 52V 30.8/15.4 watts |
|
|
Power Pin Assignment |
4/5(+), 7/8(-) |
|
|
PoE Power Budget |
440 watts@0~40 degrees C 400 watts@41~50 degrees C Auto power budget control by over temperature protection function |
|
|
Number of 802.3af PDs (Class 0, 1, 2, 3) can be powered |
24 |
|
|
Number of 802.3at PDs (Class 1, 2, 3) can be powered |
14 |
|
|
Number of 802.3at PDs (Class 0, 4) can be powered |
14 |
|
|
Management |
||
|
Management Interface |
Web, PLANET Smart Discovery Lite |
|
|
PoE Management |
Power limit by consumption and classification mode PoE admin mode Per port power schedule Per port power enable/disable Power feeding priority Over temperature protection Current per port usage and status Total power consumption |
|
|
Management Feature |
Setup of system/management functions Web firmware upgrade SNMP trap for alarm notification of events |
|
|
Standards Conformance |
||
|
Regulatory Compliance |
FCC Part 15 Class A, CE |
|
|
Standards Compliance |
IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet RFC 768: UDP RFC 791: IP RFC 2068 HTTP RFC 1157: SNMP v1 RFC 1902: SNMP v2c RFC 5424: Syslog |
|
|
Environments |
||
|
Operating |
Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 90% (non-condensing) |
|
|
Storage |
Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 90% (non-condensing) |
|
