Wi-Tek - WI-CES506GF - 2.5Gbps Cloud Easy Smart PoE/ Ethernet Switch
Product Overview
S5028FM-16T8C4X-L3 is an industrial Layer 3 managed switch with sixteen 10/100/1000 Mbps Ethernet RJ-45 ports, eight 1000 Mbps Combo SFP ports, and four 10 Gbps SFP+ uplinks. It supports IPv4/IPv6 static routing, RIP, OSPF, BGP, IS-IS, and extensive Layer 2 management functions for scalable industrial networks operating from -40°C to 75°C.
Key Configuration
Model: S5028FM-16T8C4X-L3 | Interfaces: 16 x 10/100/1000 Mbps RJ-45, 8 x 1000 Mbps Combo SFP, 4 x 10 Gbps SFP+ | Management: Console port, USB 2.0, Web, CLI, Telnet, SSH, HTTP/HTTPS | Performance: 128 Gbps switching capacity, 95.23 Mpps forwarding rate | Protection: 6 kV surge immunity, 8 kV contact and 15 kV air ESD protection
Key Features
- · Provides 16 x 10/100/1000 Mbps Ethernet RJ-45 ports
- · Includes 8 x 1000 Mbps Combo SFP ports
- · Includes 4 x 10 Gbps SFP+ uplink ports
- · Offers 128 Gbps switching capacity and 95.23 Mpps packet forwarding
- · Provides a 16K MAC address table, 12 Mbit packet buffer, and 10 kB jumbo frames
- · Supports IPv4/IPv6 static routing, ECMP, VRRP, RIP, OSPFv2, BGP4, and IS-IS
- · Supports VLAN, QinQ, STP, RSTP, MSTP, BPDU Guard, and G.8032 ERPS
- · Supports static and LACP dynamic link aggregation for 1GE and 10GE interfaces
- · Provides IGMP Snooping, QoS with eight priority queues, ACL, DHCP Snooping, and 802.1X authentication
- · Supports redundant DC and AC power inputs with reverse-polarity, over-voltage, and over-current protection
Technical Context
The 10/100/1000 Mbps RJ-45 ports provide direct copper connectivity for servers, access devices, and industrial endpoints, while the Combo SFP and 10 Gbps SFP+ interfaces support fiber aggregation and high-capacity uplinks. Layer 3 routing protocols enable inter-network communication and path control, while VLAN, QoS, IGMP Snooping, ACL, and ERPS improve segmentation, traffic prioritization, multicast delivery, access control, and network resilience.
Installation Notes
The fanless switch supports desktop or rack-mounting installation and measures 440 x 280 x 44 mm. It accepts DC 36-75 V or AC 100-240 V, 50/60 Hz power, with full-load consumption up to 36 W. The switch supports operation from -40°C to 75°C with 10%-90% non-condensing humidity and includes Ethernet and power surge protection plus 8 kV contact and 15 kV air ESD protection.
| General | |
| Model | S5028FM-16T8C4X-L3 |
| Product Type | Industrial L3 Managed Switch |
| Operating Temperature | -40°C to 75°C |
| Interfaces | |
| Downlink Ports | 16 × 10/100/1000 Mbps RJ45 ports |
| Combo Ports | 8 × 1000 Mbps Combo SFP ports |
| Uplink Ports | 4 × 10 Gbps SFP+ ports |
| Management Port | 1 × Console port |
| USB | 1 × USB 2.0 port |
| Performance | |
| Memory | 512 MB RAM |
| Flash Memory | 512 MB |
| Forwarding Mode | Store and forward |
| Switching Capacity | 128 Gbps |
| Packet Forwarding Rate | 95.23 Mpps |
| MAC Address Table | 16K |
| Packet Buffer Memory | 12 Mbit |
| Jumbo Frame | 10 kB |
| Standards and Protocols | |
| Supported Standards | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP ITU-T G.8032 ERPS |
| Power Supply | |
| DC Input | 36-75 V DC, 1.3 A maximum |
| AC Input | 100-240 V AC, 50/60 Hz, 1 A maximum |
| Power Consumption | Full load: 36 W |
| Power Protection | Reverse polarity protection Over-voltage protection Over-current protection |
| Layer 2 Features | |
| Port Aggregation | 1G port aggregation 10G aggregation Static aggregation LACP dynamic aggregation |
| Port Features | IEEE 802.3x flow control Port traffic statistics Port isolation Broadcast storm suppression Loop detection: port-based and VLAN-based Port mirroring: one-to-one, many-to-one, Tx/Rx/Both |
| VLAN | MAC-based VLAN IP-based VLAN Protocol-based VLAN GVRP: normal, fixed and forbidden modes |
| QinQ | Port-based QinQ VLAN-based QinQ Flow-based QinQ |
| Spanning Tree | IEEE 802.1D STP IEEE 802.1W RSTP IEEE 802.1S MSTP BPDU Guard G.8032 ERPS |
| DHCP | DHCP Client DHCP Snooping DHCP Option 82 |
| Multicast | Group Address support IGMP v1, v2 and v3 IGMP Snooping |
| Layer 3 Routing | |
| Routing Features | ARP Route Policy IPv4/IPv6 Static Routing ECMP VRRP |
| Dynamic Routing Protocols | RIPv1/v2 OSPFv2 BGP4 IS-IS |
| Security | |
| Access Control Lists | IP Standard ACL IP Extended ACL MAC Extended ACL L2/L3 support |
| Authentication | 802.1X port authentication MAC authentication RADIUS/TACACS+ RADIUS authentication access via Console, Telnet, SSH, HTTP and HTTPS |
| Security Features | Static and dynamic MAC address management MAC address filtering ARP message filtering IP Source Guard IP/MAC binding Port isolation |
| Quality of Service | |
| QoS Features | 8 priority queues 802.1p CoS and DSCP priority Strict Priority and WRR queue scheduling Ingress and egress rate limiting Egress queue rate limiting |
| IPv6 | |
| IPv6 Management | DHCPv6 Client IPv6 Ping IPv6 Traceroute IPv6 Telnet IPv6 SNMP IPv6 SSH IPv6 HTTP IPv6 TFTP Dual IPv4/IPv6 stack |
| Management and Maintenance | |
| Management Access | Web-based GUI Console CLI Telnet SSH HTTP/HTTPS |
| Management Protocols | SNMP v1, v2c and v3 Syslog RMON groups 1, 2, 3 and 9 NTP |
| Maintenance Features | Ping and Traceroute Optical transceiver DDM TFTP Client TFTP and web-based firmware upgrade Configuration export and import IPv6 management LLDP User management and login authentication |
| LED Indicators | |
| Power Indicator | Green on: Device power is normal Off: Device is powered off or has failed |
| System Indicator | Blinking: System initialization On: System is operating normally |
| USB Indicator | On: USB flash drive is detected Off: USB flash drive is not inserted or not detected |
| Copper Port Indicators | Green on: Port connected Green blinking: Data transmission Off: Port disconnected |
| Copper Speed Indicators | Yellow on: 1000 Mbps link Off: 10/100 Mbps link |
| Fiber Port Indicators | Green on: Port connected Green blinking: Data transmission Off: Port disconnected |
| Physical Characteristics | |
| Fan Quantity | Fanless |
| Reset Button | Hold for more than 5 seconds to restore factory defaults |
| Dimensions (W × D × H) | 440 × 280 × 44 mm |
| Package Dimensions | 525 × 390 × 95 mm |
| Net Weight | 5 kg |
| Package Weight | 5.3 kg |
| Installation | Desktop, rack-mounting |
| Reliability and Environment | |
| Ethernet Port Surge Immunity | IEC 61000-4-5 Common mode: 6 kV Differential mode: 6 kV |
| DC Power Surge Immunity | IEC 61000-4-5 Common mode: 6 kV Differential mode: 6 kV |
| AC Power Surge Immunity | IEC 61000-4-5 Common mode: 4 kV Differential mode: 2 kV |
| ESD Protection | IEC 61000-4-2 Contact discharge: 8 kV Air discharge: 15 kV |
| Operating Environment | -40°C to 75°C 10% to 90% relative humidity, non-condensing |
| Storage Environment | -40°C to 85°C 5% to 95% relative humidity, non-condensing |
| Certifications | |
| Certifications | CE, FCC, RoHS, UKCA, RCM |
| Package contents: Switch, AC power cord, rack-mount kit and quick installation guide. | |
