Wi-Tek - WI-AP219AX-Lite V2 - Ceiling Mount AP
Product Overview
WI-AP219AX-Lite V2 is a Wi-Fi 6 dual-band ceiling-mount access point designed for high-density indoor environments such as offices, hotels, stadiums, and supermarkets. It supports IEEE 802.11a/b/g/n/ac/ax with combined wireless speeds up to 3000Mbps, 2×2 MU-MIMO, OFDMA, 1024-QAM, and dual Gigabit Ethernet ports. 802.3af PoE, cloud management, fast roaming, load balancing, and automatic channel and power adjustment support flexible and efficient network deployment.
Key Configuration
Model: WI-AP219AX-Lite V2 | Wireless Standard: IEEE 802.11a/b/g/n/ac/ax | Data Rate: 2.4GHz up to 574Mbps, 5GHz up to 2402Mbps | MIMO: 2×2 on 2.4GHz and 5GHz | Antenna: 4.6dBi on 2.4GHz, 4dBi on 5GHz | Connectivity: 2×10/100/1000Mbps Base-T Ethernet ports | Power: 802.3af PoE or 12V DC/1.5A | Coverage: Up to 160m²
Key Features
- · Wi-Fi 6 dual-band connectivity with combined speeds up to 3000Mbps
- · 2.4GHz data rates up to 574Mbps and 5GHz data rates up to 2402Mbps
- · 2×2 MU-MIMO and OFDMA technology for efficient high-density connectivity
- · 1024-QAM modulation increases wireless data transmission efficiency
- · Two Gigabit Ethernet ports with WAN support for 802.3af PoE input
- · Supports 802.3af PoE or 12V DC/1.5A power supply
- · Supports up to 150 wireless clients, with 80 clients recommended
- · Fast roaming and load balancing improve mobility and client distribution
- · Multiple SSIDs with IEEE 802.1Q VLAN and SSID-to-VLAN mapping
- · Cloud, web-based, and AC management with automatic channel and power adjustment
Technical Context
OFDMA divides wireless channels into resource units, allowing multiple clients to transmit efficiently with lower latency. MU-MIMO enables simultaneous communication with multiple compatible devices, while 1024-QAM increases the amount of data carried per symbol. The 160MHz channel width on the 5GHz band helps support high-throughput applications, and automatic channel and power adjustment helps reduce interference in multi-access-point deployments.
Installation Notes
The access point is designed for ceiling-mounted installation and measures 186 × 186 × 35mm. It can receive data and power through one Ethernet cable using 802.3af PoE or operate from a 12V DC/1.5A input. Operating temperature is -20°C to 55°C with 5%-95% non-condensing humidity.
| General | |
| Model | WI-AP219AX-Lite |
| Hardware Version | V2 |
| Product Type | Wi-Fi 6 dual-band indoor ceiling-mount access point |
| Hardware | |
| Memory | 256 MB RAM 16 MB Flash |
| Interfaces | 2 × 10/100/1000 Mbps Base-T Ethernet ports WAN port supports 802.3af PoE input |
| Button | 1 × Reset button |
| Power Supply | 802.3af PoE input or 12 V DC / 1.5 A |
| Maximum Power Consumption | 16 W |
| Wireless | |
| Wireless Standards | IEEE 802.11a/b/g/n/ac/ax |
| Maximum / Recommended Clients | 150 / 80 |
| Data Rates | 2.4 GHz: up to 574 Mbps 5 GHz: up to 2402 Mbps |
| MIMO | 2.4 GHz: 2 × 2 5 GHz: 2 × 2 |
| Antenna Gain | 2.4 GHz: 4.6 dBi 5 GHz: 4 dBi |
| Frequency | 2.4 GHz: 2.4 GHz to 2.484 GHz 5 GHz: 5.150 GHz to 5.850 GHz |
| Channel Width | 2.4 GHz: 20/40 MHz 5 GHz: 20/40/80/160 MHz |
| Maximum Transmit Power | 23 dBm |
| Coverage Range | 160 m² Measured in an unobstructed ideal environment. Actual coverage depends on client performance and environmental interference. |
| Software Features | |
| Wireless Modes | Fit AP, Wireless Router Default: Fit AP mode |
| LAN Configuration | Static IP, Dynamic IP |
| WAN Configuration | Static IP, Dynamic IP, PPPoE Client |
| Wireless Configuration | Wireless enable/disable, SSID modification, SSID hiding |
| Wireless Security | WPA-TKIP, WPA2-AES, WPA1/WPA2-Mixed, WPA-Enterprise, WPA2-Enterprise, WPA2/WPA3-Mixed |
| VLAN | IEEE 802.1Q VLAN, SSID-to-VLAN mapping |
| Wi-Fi Schedule | Yes |
| RF Parameters | Adjustable country Automatic channel width selection Automatic frequency selection Adjustable transmission power Maximum associated stations, default 128 Weak signal rejection threshold, default -95 dBm User isolation, disabled by default Wi-Fi Multimedia (WMM) |
| Advanced Features | Multiple SSIDs, up to 8 per radio Ping Watchdog Scheduled reboot DHCP Server NTP Server Diagnostics: Ping, Traceroute |
| Status Monitoring | LAN/WAN information Wireless information System information Radio status Real-time flow chart Wireless terminal stations SSID list DHCP client ARP table Routing table |
| Management | Device discovery tools Local web-based management Remote management via cloud platforms and applications AC management |
| Mechanical | |
| Product Dimensions | 186 × 186 × 35 mm |
| Package Dimensions | 243 × 235 × 76 mm |
| Product Weight | 0.55 kg |
| Package Weight | 0.8 kg |
| Installation | Ceiling-mounted |
| Environmental | |
| Operating Temperature | -20 to 55 °C (-4 to 131 °F) |
| Storage Temperature | -40 to 70 °C (-40 to 158 °F) |
| Operating Humidity | 5% to 95%, non-condensing |
| Storage Humidity | 5% to 95%, non-condensing |
| Package Contents | |
| Included Items | Access point × 1 Plastic anchors × 4 Self-tapping screws × 4 Ethernet cable × 1 Quick installation guide × 1 |
| Certifications | |
| Certifications | CE, FCC, RoHS, UKCA, RCM |
