Wi-Tek - WI-CPE814P - 5GHz 5KM PTMP Wireless Transmitter

Product Overview

This Wi-Tek 5GHz 5KM PTMP Wireless Transmitter is designed for long-range CCTV and outdoor wireless network deployments that require high-speed 5GHz bridging plus PoE power distribution. It supports up to 5km wireless transmission, up to 867Mbps IEEE 802.11a/n/ac wireless speed, four Gigabit Ethernet ports, 802.3bt 90W PoE power input, and three 802.3af/at PoE output ports.

Key Configuration

Product Type: 5GHz PTMP Wireless Transmitter | Wireless Speed: Up to 867Mbps | Wireless Standard: IEEE 802.11a/n/ac | Transmission Distance: Up to 5km | Ethernet Ports: 4 x 1000Mbps | PoE Input: 802.3bt 90W | PoE Output: 3 x 802.3af/at PoE out | Frequency Range: 5.150GHz to 5.850GHz | Transmission Power: Adjustable up to 24±2dBm | Antenna: Built-in 14 dBi directional antenna | Protection Rating: IP65 | Operating Temperature: -30°C to 55°C | Management: Wi-Tek Cloud

Key Features

 · Supports 802.3bt 90W PoE power input for high-power deployment

 · Provides three 802.3af/at PoE output ports for connected PoE devices

 · Supports long-range wireless transmission up to 5km

 · IEEE 802.11a/n/ac wireless speed supports up to 867Mbps

 · Includes four 1000Mbps Ethernet ports for Gigabit wired connectivity

 · Supports open frequency operation from 5.150GHz to 5.850GHz

 · Adjustable transmission power up to 24±2dBm supports deployment tuning

 · Built-in 14 dBi directional antenna supports focused wireless links

 · Quick pairing through DIP switch simplifies setup

 · IP65 ingress protection supports outdoor use

 · -30°C to 55°C working environment supports varied outdoor conditions

 · Supports ONVIF IP camera discovery and cloud-based network topology viewing

 · Wi-Tek Cloud centralized management simplifies monitoring and maintenance

Technical Context

This transmitter is intended for point-to-multipoint CCTV and network deployments where wireless backhaul and local PoE output are needed at the same outdoor location. The 802.3bt 90W PoE input provides power capacity for the transmitter and connected PoE devices through the three 802.3af/at PoE output ports.

Cloud-based ONVIF discovery and topology viewing help administrators identify connected IP cameras and monitor the wireless network layout through Wi-Tek Cloud.

Installation Notes

This device should be installed with clear line of sight for best 5km wireless performance. Confirm 802.3bt 90W PoE power availability, PoE output load, antenna alignment, frequency settings, and DIP switch pairing configuration before deployment.