This Wi-Tek Cloud Easy Smart 100Mbps PoE Outdoor Waterproof Switch is designed for outdoor CCTV and PoE access deployments that require weather-resistant operation, cloud management, IP camera discovery, and smart PoE functions. It provides four 100Mbps RJ45 PoE ports, two 100Mbps RJ45 uplink ports, Hi-PoE support on ports 1-2, and an IP65 weatherproof and dustproof enclosure.
Product Type: Cloud Easy Smart Managed 100Mbps Outdoor Waterproof PoE Switch | PoE Ports: 4 x 100Mbps RJ45 | Uplink Ports: 2 x 100Mbps RJ45 | PoE Output: Ports 1-2 support Hi-PoE up to 45W; ports 3-4 support 802.3af/at | Total PoE Budget: Up to 62.7W | Protection Rating: IP65 | Smart Modes: 250m Extend Mode, Port VLAN Mode, PD Alive Mode | Camera Discovery: ONVIF Support | Management: Wi-Tek Cloud
· Provides four 100Mbps RJ45 PoE ports for powered network devices
· Includes two 100Mbps RJ45 uplink ports for network connectivity
· Ports 1-2 support Hi-PoE output up to 45W
· Ports 3-4 support IEEE 802.3af/at PoE devices
· Total PoE power budget of up to 62.7W supports small outdoor PoE deployments
· 250m Extend mode supports longer-distance PoE transmission
· Port VLAN mode supports traffic isolation
· PD Alive mode helps detect and recover unresponsive powered devices
· IP65 weatherproof and dustproof enclosure supports variable outdoor environments
· Alarm notifications support real-time maintenance
· ONVIF support helps automatically identify connected IP cameras
· Wi-Tek Cloud management enables real-time monitoring and remote configuration
This switch is intended for outdoor surveillance networks where a small number of IP cameras or PoE devices need 100Mbps access and cloud-based maintenance. The IP65 enclosure helps protect the switch from dust and weather exposure in variable outdoor environments.
Extend mode, Port VLAN mode, PD Alive mode, ONVIF discovery, alarm notifications, and Wi-Tek Cloud management help simplify CCTV deployment, troubleshooting, device recovery, and remote administration.
This outdoor PoE switch is suitable for CCTV and PoE access installations requiring weather-resistant deployment and remote cloud management. PoE planning should account for the total 62.7W power budget, with Hi-PoE available on ports 1-2 and 802.3af/at support available on ports 3-4.
| Model | WI-PCES206-O |
| Hardware Version | V1 |
| Interfaces | |
| Downlink Ports | 4 × 10/100Mbps RJ45 PoE Ports |
| Uplink Ports | 2 × 10/100Mbps Ethernet Ports |
| PoE | |
| PoE Ports | Ports 1-4 |
| PoE Standard | Ports 1-2: Hi-PoE, 45W Ports 3-4: IEEE 802.3af/at, 30W |
| PoE Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Budget | 60W |
| Switch Properties | |
| Standards and Protocols | IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3ab (Gigabit Ethernet) IEEE 802.3af (Power over Ethernet) IEEE 802.3at (Power over Ethernet Plus) |
| Forwarding Mode | Store and Forward |
| Switching Capacity | 1.2Gbps |
| Packet Forwarding Rate | 0.89Mpps |
| MAC Address Table | 8K |
| Packet Buffer Memory | 4Mbit |
| Jumbo Frame | 9216 Bytes |
| Flash Memory | 16MB |
| Power Supply | |
| Input Power | 100-240V AC, 50/60Hz |
| Power Consumption | Idle: 3W 100% Traffic Rate with PoE: 63W |
| Physical Characteristics | |
| LED Indicators | PWR (Orange): On: The device is powered on normally Off: The device is powered off or has failed PoE (Orange): On: PoE enabled Off: PoE disabled Link (Orange): On: Port connected Off: Port disconnected Blinking: Data transmission |
| DIP Switch Features | Extend: Extends PoE transmission distance up to 250m at 10Mbps VLAN: Each PoE port can transmit data only to uplink ports PD Alive: Detects and reboots offline compatible PoE powered devices |
| Button | Reset: Hold for >5 seconds to restore factory defaults |
| Fan Quantity | Fanless |
| Switch Dimensions | 314 × 210 × 89mm |
| Package Dimensions | 405 × 253 × 97mm |
| Weight | Net Weight: 1.06kg Package Weight: 1.77kg |
| Installation | Wall-Mounted, Pole-Mounted |
| Reliability | |
| Surge Immunity | IEC 61000-4-5 Common Mode: 4kV Differential Mode: 2kV |
| ESD Protection | IEC 61000-4-2 Contact Discharge: 6kV Air Discharge: 8kV |
| Environmental | |
| Operating Environment | -30℃ to 60℃ (-22℉ to 140℉); 10% to 90% RH, non-condensing |
| Storage Environment | -40℃ to 70℃ (-40℉ to 158℉); 5% to 90% RH, non-condensing |
| Certification | |
| Certification | CE, FCC, RoHS, UKCA, RCM |