Wi-Tek - WI-PS206S - PoE switch, 4x PoE

Product Overview

The Wi-Tek WI-PS206S V2 is a compact unmanaged PoE switch designed for powering and connecting IP cameras, wireless access points, IP phones, and other network devices. With plug-and-play operation, support for 802.3af/at and Hi-PoE up to 60W, and built-in DIP switch modes, it is a practical solution for small CCTV, Wi-Fi, VoIP, and business network deployments.

Key Configuration

Model: WI-PS206S V2 | Product Type: Unmanaged PoE Switch | Total Ports: 6 | PoE Device Support: Up to 4 powered devices | PoE Standards: IEEE 802.3af/at, Hi-PoE | Hi-PoE Output: Up to 60W per supported port | Operating Modes: Extend Mode, PD Alive, VLAN Mode | Setup: Plug and play, no configuration required | Housing: Metal casing | Applications: IP cameras, PTZ cameras, access points, IP phones, small business networks

Key Features

 · Compact unmanaged PoE switch for small network and surveillance deployments

 · Supports powering and connecting up to four IP cameras or PoE devices

 · Supports IEEE 802.3af/at PoE standards

 · Hi-PoE support up to 60W is suitable for higher-power cameras and access points

 · Extend Mode supports PoE transmission up to 250m for remote camera locations

 · PD Alive mode helps improve reliability by restarting unresponsive PoE-powered devices

 · VLAN Mode provides port isolation for improved network protection

 · Plug-and-play operation requires no software configuration

 · Metal casing supports durability and heat resistance

 · Suitable for CCTV, Wi-Fi access, VoIP phones, and small business networks

Technical Context

The WI-PS206S V2 is intended for small PoE networks where cameras, PTZ cameras, access points, or IP phones need simple power and data connectivity. Its unmanaged design makes it easy to deploy without advanced network configuration.

The built-in modes help adapt the switch to common surveillance requirements: Extend Mode supports longer cable runs, PD Alive improves powered-device recovery, and VLAN Mode isolates ports to reduce unnecessary device-to-device traffic.

Installation Notes

The WI-PS206S V2 is suitable for plug-and-play installation in small CCTV, Wi-Fi, VoIP, and business network environments. Confirm connected device power requirements before installation, especially when using Hi-PoE devices up to 60W.