Wi-Tek - WI-SFP30-I - Industrial SFP Module

Product Overview

WI-SFP30-I is an industrial SFP-to-RJ-45 transceiver module that provides 1 Gbps Ethernet connectivity over copper cabling. It supports 100BASE-TX and 1000BASE-T links up to 100 m, with plug-and-play operation and reliable performance from -40°C to 85°C.

Key Configuration

Model: WI-SFP30-I | Data Rate: 1 Gbps | Connector: RJ-45 | Power Supply: 3.3 V | Power Consumption: 0.5 W max | Protocol: SFP MSA, IEEE 802.3 Gigabit Ethernet | Operating Temperature: -40°C to 85°C

Key Features

• · Provides 1 Gbps Ethernet connectivity through an RJ-45 interface
• · Supports 100BASE-TX over Cat5 or better cable up to 100 m
• · Supports 1000BASE-T over Cat5e or better cable up to 100 m
• · Uses a 3.3 V power supply with consumption up to 0.5 W
• · Supports SFP MSA and IEEE 802.3 Gigabit Ethernet compatibility
• · Supports plug-and-play operation without configuration
• · Supports hot-plug installation in compatible SFP slots
• · Supports operation from -40°C to 85°C with 10%-90% non-condensing humidity
• · Supports storage from -40°C to 85°C
• · Complies with CE, FCC, UKCA, RoHS, and RCM requirements

Technical Context

The module converts the SFP host interface into a copper RJ-45 Ethernet connection, allowing compatible switches to use existing twisted-pair cabling. Support for both 100BASE-TX and 1000BASE-T enables flexible deployment at Fast Ethernet or Gigabit speeds while maintaining a maximum copper link distance of 100 m.

Installation Notes

Insert the module into a compatible SFP slot and connect the RJ-45 port using Cat5 or Cat5e cabling appropriate for the selected speed. The module is hot-pluggable and requires no configuration; ensure the host equipment supports SFP MSA and IEEE 802.3 Gigabit Ethernet operation.