SECO-LARM - E-931CS22RFCQ - Wireless Weatherproof Entry Alert System, 22ft
Part number:
E-931CS22RFCQ
Price:

The ENFORCER Wireless Entry Alert System is a self-contained easy-to-install alert system for commercial or home applications. Each set contains a reflective photoelectric beam sensor that, when tripped, communicates wirelessly with a speaker installed up to 328ft (100m) away*. An additional speaker may be installed to alert more than one area on the property.

 

*Range may vary depending on the installation and operating environment.

 

Features:

  • For monitoring a driveway or use as an entrance indicator
  • No wiring required between the sensor and speaker; when tripped, the sensor wirelessly transmits to any programmed speaker
  • Weatherproof (IP55) IR photoelectric beam sensor for outdoor use
  • Speaker makes “ding-dong” or siren sound if beam is interrupted
  • Speaker volume can be adjusted or turned off
  • When in siren mode, sounding time is adjustable from 3~30 seconds
  • Connect additional speakers to the sensor wirelessly (one speaker included)
  • Includes the following:
    – Weatherproof wireless reflective sensor (Tx)
    – Wireless speaker (Rx)
    – Reflector
    – Two power adapters
    – Three mounting brackets: One each for the sensor, reflector, and speaker
IP RatingSensor Only: IP55 weatherproof
TypeWireless Weatherproof Entry Alert System
Operating Frequency433.92 MHz
Operating voltageSensor & Speaker- 12VDC (adapter included)
RangeSensing- Up to 22ft (7m), Wireless- Up to 328ft (100m)
Operating Temperature32º~122º F (0º~50º C)
Current DrawSensor- Active: 20mA, Standby: 5mA; Speaker- Active: 100mA, Standby: 25mA
Light SourceIR LED
Speaker Volume0~90 dB
Alarm Time Range3~30 s (Adjustable)
DimensionsSensor- 3-1/4″ x 2-9/16″ x 1-1/2″ (82 x 65 x 37mm), Speaker- 3-1/4″ x 2-15/16″ x 1-9/16″ (83 x 75 x 40mm), Reflector- 2-3/8″ x 2-1/16″ x 3/8″ (60 x 52 x 9mm)
Speaker OutputChime / Off / Alarm (selectable)
Name
Description
Size
Downloads
File
Datasheet
0.3mb
File
Manual
0.2mb