Ideal For Analog Surveillance Systems
Analog camera deployment and high quality videos have never been simpler with the Video over Fiber media converter kit from Planet technology. The VF-402-KIT is the perfect choice to extend the range and signal conversion by the transmission of video and data over a single fiber-optic cable. The unit features intelligent encoding and decoding technology. This quality unit also comes in a compact box and permits videos to be delivered up to 20km. The VF-402-KIT includes a Video Transmitter and a Video Receiver:
- VF-402-T: 4-Channel Video over Fiber Transmitter
- VF-402-R: 4-Channel Video over Fiber Receiver
This kit is a fiber-optic transmission system that lowers the cost for dependable transmission of 4 channels of uncompressed digital video and 1 reverse RS-485 async-data over one fiber cable. The VF-402-KIT does not require adjustment but showcases high video quality and transmission. The unit can be operated simply by Intelligent Transportation Systems (ITS), Traffic Surveillance, security monitoring, automation control, intelligent residential districts and etc.
Industrial Level Monitoring Systems
The VF-402-KIT operates effectively under a range of temperatures from -25 to 75°C. The unit does not distort the transmission of high quality video and clear graphics in long distance. This unit features international uncompressed full digital error correction and gigabit fiber optical transmission technology. This unit supports hot plug and can be utilized independently or on a rack mount. The unit does not require field adjustment and operates efficiently.
Features:
- Mode: Single Mode
- Wavelength VF-402-T: TX: 1310nm RX: 1550nm
- Wavelength VF-402-R: TX: 1550nm RX: 1310nm
- Distance: 20km
- Fiber Connection: FC
- TAA Compliant
| Video Characteristics | |
| Video Channel | 4 channel bi-direction |
| Video Connector | BNC |
| Video Input / Output Impedance | 75ohm / unbalanced interface |
| Video Input / Output Voltage | 1.0 Vpp / Typical peak-peak value |
| Video Bandwidth | 5Hz to 6.5MHz |
| Video Digital Bit Width | 8/10 bit |
| Differential Gain(DG) | <1.3% (Typical Value) |
| Differential Phase(DP) | <1.3° (Typical Value) |
| SNR Weighted | >63dB (Typical Value) |
| Data Interface | |
| Data Channel | 4 channels |
| Physical Protocol | RS-485 |
| Operation Mode | Simplex |
| Data Connector | 4 Pin terminal block with screw clamps |
| Data Rate | DC-150 Kbps |
| Data Distance | RS-485: 0-20KM |
| BPS | 0-115.2Kbps |
| Bit Error Rate (BER) | < 10-9 |
| Optical Interface | |
| Optical Connector | FC |
| Fiber Type | Single-mode, single fiber |
| Distance | 20km for single mode |
| Optical Wavelength | VF-402-T:TX: 1310nm, RX: 1550nm VF-402-R:TX: 1550nm, RX: 1310nm |
| Transmitter Couple Power | Max.: 4dBM, Min.: -4dBM |
| Receive Sensitivity | -26dBm |
| Link budget | From 22dB to 30dB at 1310nm or 1550nm |
| Cable | 9/125μm single-mode cable |
| Hardware Specifications | |
| LED Indicators | One Power One for Video – Green, Link One for Fiber Optic – Green, Link |
| Dimensions (W x D x H) | 110 x 174 x 47 mm |
| Weight | 560g |
| Power Requirements | DC 5V / 2A, AC 90~264V, 50~60HZ |
| Chassis Current Consumption | 0.75Amp for 4 channel video and 1 channel data |
| Mechanical | Metal |
| Standards Conformance | |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Environment | |
| Operating | Temperature: -25 ~ 75 degrees C Relative Humidity: 0 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
