8+2 Port Network Unmanaged 10/100 PoE Switch with Long Distance CCTV mode (up to 820ft), DC52V / 120W.
Features:
| INTERFACE CHARACTERISTICS | |
| Fixed Port | 8*10/100Base-TX PoE ports (Data / Power) 2*10/100Base-TX uplink RJ45 ports (Data) |
| Ethernet Port | Port 1-10 can support 10/100BaseTX auto-sensing, full/ half duplex MDI/ MDI-X self-adaption |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP (250 meters) 100BASE-TX: Cat5 or later UTP (100 meters) |
| Functional Switch | 250m: long-distance and VLAN isolation (Default: off, Use: on), After opening, 1-8 support 10M/250m transmission |
| CHIP PARAMETER | |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3x |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 2Gbps |
| Forwarding Rate@64byte | 1.488Mpps |
| MAC | 2K |
| Buffer Memory | 1.25M |
| Jumbo Frame | 1536byte |
| LED Indicator | Power: PWR (Green), Functional switch: 100m/ 250m (Green), Network/ PoE: 1-6/ 1-10: (Green) |
| PoE & POWER SUPPLY | |
| PoE Port | Port 1 to 8 |
| Power Supply Pin | 1/2(+) 3/6(-) |
| Max Power Per Port | 30W, PoE+ |
| Total PWR / Input Voltage | 120W (AC100-240V) |
| Power Consumption | Standby<5W, Full load<120W |
| Power Supply | Built-in power supply, AC100-240V 50-60Hz, 2.2A |
| PHYSICAL PARAMETER | |
| Operation TEMP / Humidity | -4~+131°F (-20~+55°C), 5%~90% RH Non condensing |
| Storage TEMP / Humidity | -40~+176°F (-40~+80°C), 5%~95% RH Non condensing |
| Dimension (L*W*H) | 7.6 x 5.1 x 1.5in (195 x 130 x 40mm) |
| Net /Gross Weight | 1.6lb / 2.2lb (0.75kg / 1.0kg) |
| Installation | Desktop, Wall mount |
| CERTIFICATION & WARRANTY | |
| Lightning Protection | 4KV 8/20us, Protection level: IP30 |
| Certification | CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS |