Engenius - EAP600 - High Power Wireless-N 2.4Ghz/5GHz 300Mbps + 300Mbps Concurrent Dual-band Access Point/WDS/Repeater with Smoke Detector Design, PoE Capable, SSID Mapping VLAN
High Power Wireless-N 2.4Ghz/5GHz 300Mbps + 300Mbps Concurrent Dual-band Access Point/WDS/Repeater with Smoke Detector Design, PoE Capable, SSID Mapping VLAN, With dual-band, 11n concurrent speeds to 300 Mbps over each band, the EAP600 is a network workhorse that utilizes Band Steering to detect and shift dual-band-capable clients to the less-congested 5 GHz band, optimizing bandwidth. It operates in various settings to support today’s demanding applications.
Features:
- Ceiling-Mount Blends With Building Aesthetics
- High Transmit Power to 29 dBm Ensures Greater Range & Penetration
- Wide-Extending 5 dBi Antenna Array Minimizes Interference
- 802.3af-Compliant Gigabit PoE Port Expands Deployment & Power Options
|
Power requirements |
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz (Depends on different countries) Active Ethernet (Power over Ethernet, IEEE 802.3af/at) 48 VDC/0.375A Device: 12V/2A |
|
Wireless Standard |
IEEE 802.11 a/b/g/n |
|||||||||||||
|
Frequency Band |
Radio I: 802.11 b/g/n 2.412 ~ 2.484(GHz) Radio II: 802.11 a/n 5.18~5.24(GHz), 5.26~5.32(GHz), 5.5~5.7(GHz), 5.745~5.825(GHz) |
|||||||||||||
|
Modulation Technologies |
OFDM: BPSK, QPSK, 16-OAM, 64-QAM, DBPSK, DQPSK, CCK |
|||||||||||||
|
Operating Channels |
2.4GHz: US/Canada 1-11 2.4GHz: Europe 1-13 2.4GHz: Japan 1-14 5GHz: Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 |
|||||||||||||
|
Transmit Power |
802.1 1b
|
802.11n (2.4GHz)
|
||||||||||||
|
802.11g
|
||||||||||||||
|
802.11n (5GHz)
|
||||||||||||||
|
802.11a
|
||||||||||||||
|
Receiver Sensitivity |
802.11b ≤ -98 dBm @ 1Mbps ≤ -93 dBm @ 11Mbps 802.11g ≤ -96 dBm @ 6Mbps ≤ -82 dBm @ 54Mbps 802.11a ≤ -90 dBm @ 6Mbps ≤ -72 dBm @ 54Mbps |
|||||||||||||
|
Tx Power Control |
Adjust transmit power by dBm |
|
Configuration |
Web-based configuration (HTTP)/Telnet |
|
Telnet Server |
CLI |
|
Firmware Upgrade |
Upgrade firmware via web browser |
|
Administrator Setting |
Administrator Username & Password change |
|
Reset Setting |
Reboot (press 1 second). Reset to Factory Default (press 10 second) |
|
System Monitoring |
Status Statistic and Event log |
|
SNMP |
V1, V2c, V3 |
|
MIB |
MIB I, MIB II (RFC1213) and Private MIB |
|
Traffic Shaping |
Incoming and outgoing wireless traffic shaping |
|
Auto-channel Selection |
Automatically selecting least congested channel |
|
Bandwidth Measurement |
IP range and bandwidth management |
|
Auto Reboot |
Reboot AP by min, hour, day, week |
|
Backup & Restore |
Save & restore settings through Web interface |
|
CLI |
Support Command Line Interface |
|
Diagnosis |
IP pinging statistics |
|
Log |
SysLog and Local Log support |
|
LED Control |
On/Off |
|
AP Detection |
Scanning for available EnGenius APs |
