The SWT-F11MGHP is a managed switch with three 100/1000Base-FX SFP ports and eight 10/100Base-TX ports. Two of the SFP ports support 2.5 Gbps SFPs for high-speed communication in bandwidth-intensive applications. All SFP ports utilize SFP modules for fiber and connector type, and distance selection. The Port Guardian feature provides additional cybersecurity protection by enabling physical port lockout in the event that an existing cable is disconnected and prevents a potential network incursion using common spoofing techniques. The intrusion event is reported back to the operator using SNMP. The switch offers multiple Ethernet redundancy protocols which protect your applications from network interruptions or temporary malfunctions by redirecting transmission within the network. Advanced IP-based management can limit the maximum bandwidth for each connected IP device, allowing the user to adjust usage. The SWT-F11MGHP provides eight electrical ports supporting up to 30 watts of PoE+ power, and four of the eight PoE ports can support up to 60 watts of PoE power. All PoE ports are IEEE802.3af/IEEE802.3at compliant. The SWT-F11MGHP is composed of the SWT-F0803MGHP240 Switch and PWR-DR48480 Power Supply.

• 3 × 100/1000Base-FX SFP 8 × 10/100Base-TX RJ45
• 2 × SFP ports also support 2.5 Gbps SFP modules for high speed communication
• 8 × IEEE802.3at compliant 30 W PoE+ ports, with 4 x ports supporting 60 W PoE++
• Total PoE budget 240 W
• Fast Redundancy/Recovery – MSTP/RSTP/STP (IEEE802.1s/w/D) and ERPS G.8032
• Layer 3 static routing
• Supports IPV6 new internet protocol version
• Provided HTTPS/SSH protocol enhances network security
• Supports Device Binding security function
• Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
• Supports ACL, 802.1x User Authentication for security
• Web-based, Telnet and Console (CLI) configuration
• Designed for wall or DIN rail mount installations
• Hardened high-temperature DIN Rail Power Supply Included