Connecting to IEEE 802.3af devices
Due to the capability of IEEE 802.3af standard, the POE-152 can directly connect with any IEEE 802.3af end-nodes like wireless access point, IP phones and Internet camera which support IEEE 802.3af In-line Power over Ethernet port.
Installation of IEEE 802.3af Injector and Splitter
For a place which is hard to find the power inlet, the POE-152 and POE-152S-5V/12V as a pair should provide the easiest way to power your Ethernet devices, such as PLANET ICA-110, Internet camera on the ceiling, or WAP-4000, wireless access point which is installed on the top of the building. It’s the same as the VIP-154PT, the IP phone used in office or home.
Features:
Ethernet Connector | 2 x RJ-45 (1 for data + DC out, 1 for Data in) |
Ethernet Data Rate | 10/100/1000Mbps (varies on Ethernet device attached) |
Input Voltage | DC 48V, 0.4A |
Number of devices can be powered | 1 |
Ethernet Cable | TIA/EIA-568, Category 5/5e/6 cable |
LED Indicator | 1 x power, 1 x POE ready / in-use |
Operating Temperature | 0~50 degrees C, 5~90% RH |
Storage Temperature | -20~70 degrees C, 5~90% RH |
Dimensions (W x D x H) | 73 x 55 x 24 mm |
Weight | 50g |
Emission | FCC Class B, CE mark |
Standard Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3af Power over Ethernet |