Planet - SGS-5220-24P2X - L2+ 24-Port 10/100/1000T 802.3at PoE + 2-Port 10G SFP+ Managed Stackable Switch / 440W

 

Part number:
SGS-5220-24P2X
Price:

The SGS-5220-24P2X is Layer 2+ Stackable Managed Gigabit Switch provides 24 10/100/1000Mbps 802.3at PoE+ ports, 4 shared Gigabit SFP slots, 2 10G SFP+ uplink slots and another 2 dedicated 10G SFP+ stacked interfaces for stacking with the series of switches.

 

Features:

  • Ports: 24 10/100/1000TX Shared 4 10/100/1000 TP/SFP
  • Type: Managed
  • PoE Ports: 24 PoE Ports
  • Standard: 802.3at/af
  • PoE Budget: 440W @ 25°C, 380W @ 50°C
  • Power Consumption: 502 Watts / 1712.8 BTU
  • Throughput: 95.2Mpps@64Bytes
  • Operating Temperature: 0 to 50°C AC
  • TAA Compliant

 

High-density, Resilient Deployment Switch Solution for Gigabit Networking of Enterprise, Campus and Data Center

For the growing Gigabit network and IoT (Internet of Things) demand, PLANET has launched a new-generation Stackable Gigabit Switch solution, the SGS-5220 switch series, to meet the needs of enterprises, telecoms and campuses for a large-scale network deployment. The SGS-5220-24P2X is Layer 2+ Stackable Managed Gigabit Switch, which supports both IPv4 and IPv6 protocols and hardware Layer 3 static routing capability, and provides 24 10/100/1000Mbps 802.3at PoE+ ports, 4 shared Gigabit SFP slots, 2 10G SFP+ uplink slots and another 2 dedicated 10G SFP+ stacked interfaces for stacking with the series of switches. Up to 16 units, 384 Gigabit Ethernet PoE+ ports and 32 10Gbps SFP+ slots can be managed by a stacking group and you can add ports and functionality as needed.

 

Efficient Single IP Management

The SGS-5220 stackable series applies the advantage of the stacking technology to managing the stack group with one single IP address, which helps network managers to easily manage a stack of switches instead of connecting and setting each unit one by one. The stacking technology also enables the chassis-based switches to be integrated into the SGS-5220 Stackable Managed Switch series at an inexpensive cost.

 

Highly-reliable Stacking Ability

Through its up to 40Gbps, bi-directional high bandwidth tunnel and stacking technology, the SGS-5220-24P2X gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The stack redundancy of the SGS-5220-24P2X ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.

Hardware Specifications
Copper Ports24 10/ 100/1000BASE-T RJ-45 Auto-MDI/MDI-X ports
10/100/1000Mbps / SFP Combo Interfaces4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP (Mini-GBIC) supports 100/1000Mbps Dual mode DDM, shared with Port-21 to Port-24
10Gbps Fiber Uplink Ports2 1/10GBASE-SR/LR SFP+ slots
10Gbps Fiber Stackable Ports2 10GBASE-SR/LR SFP+ slots
Console1 x RJ45 serial port (115200, 8, N, 1)
Switch ArchitectureStore-and-Forward
Switch Fabric128Gbps / non-blocking
Throughput95.2Mpps@64Bytes
Address Table16K entries, automatic source address learning and ageing
Shared Data Buffer4 megabits
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame9K bytes
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
LEDSystem:
PWR (Green), Master (Green),
PWR1 (Green), PWR2 (Green), FAN1 (Green), FAN2 (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 24):
10/100/1000Mbps LNK/ACT (Green)
PoE In-Use (Orange)
100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
1000Mbps (Green), LNK/ACT (Orange)
1/10Gbps SFP+ Interfaces (Port 25 to Port 26):
10Gbps LNK/ACT (Green), 1Gbps LNK/ACT (Orange)
10G Stackable Interfaces (Port 27 to Port 28):
Stack (Green), LNK/ACT (Orange)
Power Requirements100~240V AC, 50/60Hz
Power Consumption (Full Loading)502 watts / 1712.8 BTU Max.
ESD Protection6KV DC
Dimensions (W x D x H)440 x 300 x 44.5 mm, 1U height
Weight4887g
Stacking Functions
Stacking Ports2 SFP+ slots
Stacking Numbers16
Stacking Bandwidth40Gbps full duplex
Stack ID Display7-Segment LED display (1~9, A~F, 0)
Stack TopologyRing / Chain / Back-to-Back
Power over Ethernet
PoE StandardIEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply TypeEnd-span
PoE Power OutputPer Port 56V DC, Max. 30.8 watts
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget440 watts (max.) @ 25 degrees C
380 watts (max.) @ 50 degrees C
PoE AbilityPD @ 7 watts 24 units
PD @ 15.4 watts 24 units
PD @ 30.8 watts 14 units
Layer2 Management Function
Basic Management InterfacesConsole, Telnet, Web Browser, SNMP v1, v2c
Secure Management InterfacesSSH, SSL, SNMP v3
Port ConfigurationPort disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Port StatusDisplay each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
Port MirroringTX / RX / Both
Many-to-1 monitor
VLAN802.1Q tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link AggregationIEEE 802.3ad LACP / Static Trunk
Supports 14 groups of 8-Port trunk
QoSTraffic classification based, Strict priority and WRR
8-level priority for switching
– Port Number
– 802.1p priority
– 802.1Q VLAN tag
– DSCP/TOS field in IP Packet
IGMP SnoopingIGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
IGMP Querier mode support
MLD SnoopingMLD (v1/v2) Snooping, up to 255 multicast Groups
MLD Querier mode support
Access Control ListIP-based ACL / MAC-based ACL
Up to 256 entries
Bandwidth ControlPer port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
SNMP MIBsRFC 1213 MIB-II
RFC 2863 IF-MIB
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2737 Entity MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2618 RADIUS Client MIB
RFC 3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Power over Ethernet MIB
Layer3 Function
IP InterfacesMax. 128 VLAN interfaces
Routing TableMax. 32 routing entries
Routing ProtocolsIPv4 hardware static routing
IPv6 hardware static routing
Standards Conformance
Regulation ComplianceFCC Part 15 Class A, CE
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z 1000BASE-SX/LX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2
Environments
OperatingTemperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Name
Description
Size
Downloads
File
Specification
0.4mb
File
Quick_Guide
1.3mb