The ENFORCER 4K ENHANCED HDMI Long Range Extender extends the range of HDMI signals by using an active transmitter and receiver to send video and audio, RS-232, and bi-directional IR over a single Cat5e/6 cable. It can send 1080p signals up to 492ft (150m) between the two units with zero signal loss, while 4K2K/UHD HDMI signals can be transmitted up to 394ft (120m). A single power supply can power both devices from either end of the installation.
Features:
Input video signal | 3.3V |
Input DDC signal | 5Vp-p (TTL) |
Maximum single link range | 4K2K@60Hz |
Deep color | 48-bit |
Video formats supported | All HDMI 3D, HDCP 2.2 |
Audio formats supported | LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, |
Dolby Digital Plus (DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X | |
L/R Audio formats | PCM 2.0 |
Output video | HDMI |
Resolutions supported | 4K2K@50/60Hz, 4K2K@30Hz, 1080p, 1080i, 720p, 720i, 480p, 480i |
Range | 1080p: 492ft (150m) , 4Kx2K: 394ft (120m) |
Video amplifier bandwidth | 18Gbps |
Video input connector | HDMI Type A 19-pin female |
Max. HDMI cable length (IN/OUT) | 4K@60Hz, 16′ (5m) / 4K@30Hz, 32′ (10m) / 1080p@60Hz, 50′ (15m) |
Cat5e/6 wiring standard | T568-B |
IR Pass-through | 20~60kHz |
Operating voltage | 24VDC |
Power supply | 1A@24VDC (1 adapter) |
ESD protection (human body model) | ±8kV (air-gap discharge), ±4kV (contact discharge) |
Current draw (both units total) | 390mA |
Operating humidity | 20~90% (non-condensing) |
Operating temperature | 32°~104° F (0°~40° C) |
Dimensions | 5-1/2″x11/16″x2-9/16″ (140x18x65 mm) |
Weight | Transmitter 5.6-oz (160g), Receiver 5.5-oz (155g) |