SIP Intercom with one Button (Audio)
Physical & Power
⚫ Front panel: Aluminum |
⚫ Power out: 12V/400mA |
⚫ Button: 1 call button |
⚫ 802.3af Power-over-Ethernet |
⚫ Wiegand port: Support |
⚫ 12V DC connector (if not using PoE) |
⚫ RS485 port: Support |
⚫ Water-proof & Dust-proof: IP65 |
⚫ Relays out: 2 |
⚫ Installation: Flush-mounted or Wall-mounted |
⚫ Inputs: 3 |
⚫ Flush-mounted DIM: 213x124x68mm |
⚫ Microphone: -40dB |
⚫ Wall-mounted DIM: 190x110x40mm |
⚫ Speaker: 8Ω / 2W |
⚫ Working Humidity: 10~90% |
⚫ Ethernet port: RJ45, 10/100Mbps adaptive |
⚫ Working Temperature: -20°C ~ +55°C |
|
⚫ Storage Temperature: -40°C ~ +70°C |
Audio |
Deployment |
⚫ SIP v1 (RFC2543), SIP v2 (RFC3261) |
⚫ Auto-Provisioning |
⚫ Narrowband audio codec: G.711a, G.711μ, G.729 |
⚫ Web management portal |
⚫ Broadband audio codec: G.722 |
⚫ Web-based packet dump |
⚫ DTMF: In-band, out-of-band DTMF (RFC2833), |
⚫ Configuration backup / restore |
SIP Info |
⚫ Entry log export |
⚫ Echo Cancellation |
⚫ Access table export / import |
⚫ Voice Activation Detection |
⚫ Firmware upgrade |
⚫ Comfort Noise Generator |
⚫ System logs (include door access logs) |
Door Entry Feature |
⚫Relays controlled individually by DTMF tones
Networking & Protocol
⚫Protocols support: IPv4, HTTP, HTTPS, FTP,
SNMP, DNS, NTP, TCP, UDP, ICMP, DHCP, ARP
Application Scenario |
⚫Office door phone with on-site or hosted IP-PBX
⚫Remote site entry over Internet
⚫Apartment/flat intercom with door access control