MegaDome® G3 RS third generation megapixel cameras provide ample resolution to zoom-in for details in live or recorded video. With an IR corrected motorized lens and gimbal, MegaDome G3 RS is easy to install and manage with “no-touch” remote setup. Install the magnetic mounting plate, connect the PoE (Powerover-Ethernet) IP cable, magnetically snap in place and fasten the camera to the mounting plate, and then remotely configure the camera. Use the intuitive interface to remotely pan, tilt, zoom, and focus the sensor.
These indoor/outdoor all-in-one solutions integrate a 1080p, 3 or 5-megapixel (MP) sensor with fast frame rates, and SNAPstream™ (Smart Noise Adaptation and Processing) technology to reduce bandwidth without impacting image quality. The True Day/Night mechanical IR cut filter provides the highest image quality at any time of day. Select 3MP models of MegaDome G3 RS include wide dynamic range (WDR), delivering up to 100dB at full resolution for applications with bright or over saturated lighting conditions. All models feature CorridorView™ for 90° image rotation, non-integer scaling, and an SDHC memory card slot for internal storage. The installer-friendly housing is IP66 rated for both indoor and outdoor applications and the cast-aluminum housing is IK-10 impact resistant, capable of withstanding the equivalent of 55 kg (120 lbs) of force.
The camera is integrated with the industry’s leading VMS/NVR platforms. Using the camera interface or the AV IP Utility, security updates and both new or enhanced features can be applied to the cyber-hardened MegaDome G3 RS’s Massively Parallel Image Processing (MPIP) architecture. This in house developed architecture runs on the Field Programmable Gate Array (FPGA) integrated circuit that is at the core of every Arecont Vision camera. The MegaDome G3 RS is ONVIF (Open Network Video Interface Forum) Series S compliant, providing interoperability between network video products regardless of manufacturer.
Features:
Programmability
Optics |
Remote focus, remote zoom |
|
Low Light Performance |
Pixel Binning Mode |
|
Programmable |
Controls motion blur, 1ms–500ms |
|
Shutter Speed |
||
|
||
Motion Detection |
Real-time, 1024 detection zones |
|
Privacy Masking |
Unlimited |
|
Scaling |
Non-integer scaling down to 128x96 |
|
Casino Mode™ |
Maintains 30fps or higher (AV2355RS model) |
|
Flexible Cropping |
Resolution windowing down to 1x1 pixel for JPEG and |
|
|
2x2 pixels for H.264 |
|
Backlight |
Multi-matrix white balance |
|
Compensation |
||
|
||
Flicker Control |
5Hz–255Hz adjustable |
|
Image Rotation |
CorridorView™ (90°, 180° and 270° image rotation) |
|
Wide Dynamic Range |
Auto adjustment between WDR and LDR modes |
|
|
(WDR models only) |
|
Efficiency |
SNAPstream™ (Smart Noise Adaptation and Processing) |
|
|
Bit rate and bandwidth limitation control |
|
|
Bandwidth and storage savings by running at 1/4 resolution |
|
Sharpness |
Selectable enhancement level |
|
Miscellaneous |
Programmable resolution, brightness, saturation, gamma, tint |
|
|
Electronic pan, tilt, zoom (PTZ) |
Data Transmission
Compression Type |
H.264 (MPEG-4, Part 10) / Motion JPEG |
|
21 levels of quality |
Network Protocols |
HTTP, HTTPS, IPv4, 802.1x, RTSP, RTP/TCP, RTP/UDP, TFTP, |
|
DHCP |
Network Interface |
100Base-T Ethernet |
Multi-Streaming |
8 non-identical streams |
Compliance
Industry Standard |
ONVIF Profile S conformant |
Listings |
UL (CB) |
FCC Compliance |
47 CFR 15 Class A |
Environmental |
RoHS, REACH, WEEE |
Markings |
CE: EN55022 Class A, EN55024, EN61000-3-2, |
|
EN61000-3-3, EN60950-1 |
Networking Standard |
IEEE 802.3af-2003 PoE Standard, Class 3 |
Mechanical |
IK-10 (EN62262), IP66 (EN60529) |
CoO |
Made in the USA |
Environmental
Operating Temperature |
-40°C (-40°F) to +50°C (122°F) |
|
With motor operation: -10°C (14°F) to +50°C (122°F) |
Humidity |
0% to 90% (non-condensing) |
Storage Temperature |
-40°C (-40°F) to +60°C (140°F) |
Electrical
Alarm Input/Output |
General purpose opto-coupled, 1 input/1 output |
Power Over Ethernet |
PoE 802.3af, Class 3 |
Auxiliary Power |
12–48V DC, 24V AC |
Heater Electrical
Power Consumption |
2.28W max |
Switch On/Off |
On: 4°C (32.9°F), Off: 6.5°C (43.7°F) |
Power Over Ethernet |
Total PoE solution (no external power requirement) |